View Single Post
  #1 (permalink)  
Old 12-22-2006, 06:28 PM
andrew's Avatar
andrew
andrew is offline
Administrator
-C-I-C-C-I Associate Member
Join Date: Nov 2003
Location: Columbus, Ohio
Age: 55
Posts: 7,519
Received 15 Likes on 14 Posts
Unhappy WOW ... stop the rust while you can ...

before its too late.

the weather stripping below the door is holding water at the welded seam & majorly rusting the lower part of your door... pull your lower door seal back to view the results. i'm sure mine is minor compared to most ... being i am always waxing & drying the door jambs. not good.


passenger side:
rust.jpg

passenger side:
IMG_4482.jpg

drivers side:
IMG_4478.jpg

drivers side:
IMG_4481.jpg


~ link to the repair: https://www.crossfireforum.org/forum...you-can-3.html


i am going to apply "por15" to the effected area (track/lip)... to penetrate & seal the rust. i will follow-up with completed pics this week.

see product link: http://www.por15.com/s.nl/it.A/id.1404/.f

for the time being... i rubbed out the area (removing surface rust the best i could) and heavily waxed the seam.
 

Last edited by andrew; 06-03-2012 at 12:09 PM.