I should have contacted Kenwood first. They informed me that 35 is the max.

I guess that my hearing is safe for now!

 

This is the look I want in my 2005 Chrysler Crossfire SRT-6 convertible. My question to you is what all will I need to complete the swap with the stock Inifinity stereo as far as installation kits are concerned? I was looking at Crutchfield's kit which would suggest I can "plug and play". Cutting wires is not an option I would pursue.

Your input would be invaluable. Thank You!

Best,

 

Just the kenwood marine radio and scosh, wiring harness, and the antenna adapter, the harness plugs into the factory harness, but the pigtails from the scosh harness connect to the pigtails from the new head unit harness.

 

I made a thread in 2014 titled
Kenwood kmr-558bt
That has the wiring harness number in it and how I routed the wire for the mic.
Then after it is all set up, just playing around in head unit setting gs getting color to match dash, mic sensativity, etc.

 

Thanks for the quick reply Speedy. You provided the exact info I needed. I'll search out that thread as well. Best!

 

Go here (CLICK) for a complete how to on the radio swap to a Kenwood KMR-D562BT.
It gives a list of the parts required and instructions.

For the record the antenna adapter is not required for those who have the Infinity Nav radio as it already on the antenna cable.