All in 1 manual top tool
Join Date: Jun 2009
Location: Fort Worth, Texas
Age: 64
Posts: 13,449
Received 878 Likes
on
684 Posts
Re: All in 1 manual top tool
Here is an excerpt from my order with their part # :
( here's the direct link : http://www.ecstuning.com/Search/SiteSearch/ES1746403/ )
( here's the direct link : http://www.ecstuning.com/Search/SiteSearch/ES1746403/ )
Last edited by ala_xfire; 04-22-2015 at 02:19 PM.
Re: All in 1 manual top tool
Here's a very comprehensive video from Pizza Guy...
Re: All in 1 manual top tool
OK, you made me go look.
A2088990080
Schlussel ( Notbetatigungal )
Hand Operated Top
at "10" stamped on the wrench end, a "6" stamped on the hex end.
2 depressed stampings, one on either side that seem to serve no purpose, but hey, these were German engineers, go figure.
A2088990080
Schlussel ( Notbetatigungal )
Hand Operated Top
at "10" stamped on the wrench end, a "6" stamped on the hex end.
2 depressed stampings, one on either side that seem to serve no purpose, but hey, these were German engineers, go figure.
Re: All in 1 manual top tool
call cicci. and gave them part number. they could not confirm that its correct tool based on ph call to mercedes. they would need to order from cedes dealer.
had checked with numerous chrysler dealers and resources in rho.de island and tenn. that didn't pan out. if they could find it it would be is 120. range" don't put anything on table that your not ready to lose" so given the helpfulness of this sitei in past ordered one
had checked with numerous chrysler dealers and resources in rho.de island and tenn. that didn't pan out. if they could find it it would be is 120. range" don't put anything on table that your not ready to lose" so given the helpfulness of this sitei in past ordered one