SRT6 Engine and Crossfire Dash Plaques - CrossfireForum - The Chrysler Crossfire and SRT6 Resource


Reply
 
 
 
LinkBack Thread Tools
  #1 (permalink)  
Old 12-02-2006, 03:18 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default SRT6 Engine and Crossfire Dash Plaques

Thanks to all who have ordered their plaques. I hope you liked them.

I have run out of SRT6 plaques and will order more if there is interest. Several people claimed they wanted one from the first two batches and I ordered enough to cover their requests. However when it came time to pay for them they changed their minds. This left me with the bill for them. Again thank you to all those who finally did order them.

There have been several new requests now that I have run out of the SRT6 engine plaques (I still have some of the Crossfire dash plaques on hand). I will order more, but I am going to have to request payment in advance. Please answer in this thread or send me a PM.



The new engine plaques do not have holes.



This is a sample location. The most popular has been on the bulkhead brace between the seats.

The SRT6 is deeply etched aluminum and the dash plate is a high luster brushed "platinum" finish with 3M auto adhesive strips. Price is $18.50 each with $2.00 S&H (order both and there is only one $2.00 S&H charge)

meso46 and timscudas yours have been sent and you should be getting yours this coming week.
Reply With Quote
  #2 (permalink)  
Old 12-02-2006, 05:00 PM
blacklimitedcoupe's Avatar
Forum Regular
 
Join Date: May 2006
Location: Southwest FL
Posts: 916
Default Re: SRT6 Engine and Crossfire Dash Plaques

I just wanted to thank SRTSIX for these plaques. I purchased 2 of the dash plaques and I am very impressed by them. Everytime someone gets in my car, they compliment on the plaque.
Reply With Quote
  #3 (permalink)  
Old 12-10-2006, 08:44 PM
 
Join Date: Dec 2006
Location: SOUTH MERRICK, NEW YORK
Age: 61
Posts: 40
Default Re: SRT6 Engine and Crossfire Dash Plaques

I Wish To Purchase A Crossfire Plaque For My 2004 Crossfire Ltd. How Do I Go About Ordering? Do You Sell Any Other Crossfire Products?
Reply With Quote
  #4 (permalink)  
Old 12-11-2006, 03:15 AM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Mitchell,

PM me with your email address. I only have the plaques at this time.
Reply With Quote
  #5 (permalink)  
Old 01-09-2007, 08:31 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Screamin Joe your SRT6 engine plaques have been sent...

Moneypenny, your dash plaque has been sent...

Wocar your dash plaque was resent today...

Thanks all!

I just received another 8 SRT6 plaques. These are like the original with the holes. They actually let the JB Weld gasses vent as it is curing.



I also have a few of the Crossfire dash plaques left.

Reply With Quote
  #6 (permalink)  
Old 01-10-2007, 01:17 AM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Iamfink2 your dash plaques will ship 1/10...

Rydiak your SRT6 engine plaque will ship 1/10...

Thanks and enjoy,

Karl
Reply With Quote
  #7 (permalink)  
Old 01-10-2007, 12:51 PM
Iamfink2's Avatar
Senior Member
 
Join Date: Nov 2004
Location: Laurel, MD
Age: 59
Posts: 1,519
Default Re: SRT6 Engine and Crossfire Dash Plaques

Quote:
Originally Posted by SRT SIX
Iamfink2 your dash plaques will ship 1/10...
Thanks and enjoy,
Karl
Thanks, looking forward to receiving them.
Reply With Quote
  #8 (permalink)  
Old 01-10-2007, 02:32 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Iamfink2 - Let me know when you get them. Try to take pics and post. There have been a number of creative locations. I have moved mine to the bulkhead behind the seats.

Steve Hellums - your set of both the dash plaque and the SRT6 engine plaque is being sent today. Expect to see them in 3 to 5 working days. Hope you like them and post pics.

Thanks,

Karl
Reply With Quote
  #9 (permalink)  
Old 01-10-2007, 02:45 PM
Steve Hellums's Avatar
Senior Member
 
Join Date: Oct 2006
Location: INDIANA
Age: 55
Posts: 1,385
Default Re: SRT6 Engine and Crossfire Dash Plaques

Thanks Karl, just wondering is the SRT6 dash plaque different than a regular Crossfire one? I'll have to get my wife to help me with the pic's, I'm one of those older generation guy's that thought they could get through life without learning computers till the past few years. So my computer skills are limited, I've been trying to get her to help me get some pic's posted in my gallery, but she seems to always have something else more pressing.
Reply With Quote
  #10 (permalink)  
Old 01-10-2007, 03:20 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

The dash plaque is to honor the Crossfire. The image is that of the original concept car that spawned them all.

The SRT6 plaque recognizes the unique hand crafted engine.

I am one of the "senior" owners myself. However I got started with computers a long time ago; I now work for Intel.

Enjoy,

Karl
Reply With Quote
  #11 (permalink)  
Old 01-10-2007, 09:41 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Xfire2005 - your dash plaque will go out on 1/11. Please allow 3 to 5 working days.

Here is a picture of the bulkhead location.



Thanks and enjoy,

Karl
Reply With Quote
  #12 (permalink)  
Old 01-13-2007, 08:57 PM
 
Join Date: Nov 2006
Location: Prospect Heights
Posts: 192
Default Re: SRT6 Engine and Crossfire Dash Plaques

I just got my engine plaque in, and am installing it now. Thanks Karl!
Reply With Quote
  #13 (permalink)  
Old 01-15-2007, 04:03 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Rhacker382 - Your dash plaque will go out 1/16.

Tooltym - Both your dash plaque and SRT6 engine plaque will ship 1/16.

Please allow 3 - 5 business days.

Enjoy,

Karl
Reply With Quote
  #14 (permalink)  
Old 01-15-2007, 06:37 PM
+fireamx's Avatar
Senior Member
 
Join Date: Aug 2005
Location: Akron, Ohio
Age: 66
Posts: 7,487
Default Re: SRT6 Engine and Crossfire Dash Plaques

Karl, I received my dash plaque on Saturday, and it looks great. I just haven't decided where I'm going to put it yet.
Thanks a lot!

Mike
Reply With Quote
  #15 (permalink)  
Old 01-15-2007, 06:41 PM
rhacker382's Avatar
 
Join Date: Jan 2007
Location: Binghamton Area / Upstate NY
Age: 50
Posts: 286
Default Re: SRT6 Engine and Crossfire Dash Plaques

Quote:
Originally Posted by SRT SIX
Rhacker382 - Your dash plaque will go out 1/16

Tooltym - Both your dash plaque and SRT6 engine plaque will ship 1/16

Please allow 3 - 5 business days.

Enjoy,

Karl
Thank you Karl.

Ray
Reply With Quote
  #16 (permalink)  
Old 01-15-2007, 07:02 PM
Iamfink2's Avatar
Senior Member
 
Join Date: Nov 2004
Location: Laurel, MD
Age: 59
Posts: 1,519
Default Re: SRT6 Engine and Crossfire Dash Plaques

I also got mine on saturday but I want to get it engraved with my build number before I install it, thanks Karl.
Reply With Quote
  #17 (permalink)  
Old 02-03-2007, 07:34 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Screaminjoe,

The two additional SRT6 engine plaques went out today. Sorry for the delay. I have been out of town.



Thanks and enjoy,

Karl
Reply With Quote
  #18 (permalink)  
Old 02-12-2007, 01:58 PM
SRT SIX's Avatar
Senior Member
Thread Starter
 
Join Date: May 2006
Location: Folsom, CA
Posts: 3,010
Default Re: SRT6 Engine and Crossfire Dash Plaques

Thom, thanks for your second order on the dash plaques. Glad you like them. It has been sent. Please allow 3-5 working days.

I have a new batch of SRT6/AMG engine plaques with no screw holes for those who wanted them.

I need to clear four SRT6 plaques with holes...So here is the offer, order both dash and engine plaques (normal price $39.50 for both) and you can get them both for $30.

Karl
Reply With Quote
  #19 (permalink)  
Old 02-12-2007, 03:41 PM
Sidez's Avatar
Senior Member
 
Join Date: Sep 2006
Location: New Jersey
Posts: 1,717
Default Re: SRT6 Engine and Crossfire Dash Plaques

you have a pm. thank you for doing this for us.
Reply With Quote
  #20 (permalink)  
Old 02-12-2007, 05:52 PM
Sidez's Avatar
Senior Member
 
Join Date: Sep 2006
Location: New Jersey
Posts: 1,717
Default Re: SRT6 Engine and Crossfire Dash Plaques

money sent.
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
SRT SIX no longer AWOL SRT SIX All Crossfires 13 06-22-2015 05:37 PM
Dash Cam Placement? RyanB All Crossfires 2 06-11-2015 10:25 AM
Second race of 2015 with a PAX win MJPowers Crossfire Awards and Trophies 6 06-08-2015 02:34 AM
WindRestrictor® bells and whistles - wiring accessories WindRestrictor Forum Vendor - Parts/Accessories for sale 0 06-01-2015 02:31 PM
Radiator Fan & Electronics Nick97 Troubleshooting & Technical & Modifications 1 05-30-2015 08:13 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 02:38 AM.