PO335, replaced Cam & Crank sensor PO335 code remains
PO335, replaced Cam & Crank sensor PO335 code remains
Hey Guys,
My 2004 coupe stalled out on me in the drive ( when it reached operating temp. ), with my scanner I pulled an PO335 code, I've since replaced the Cam and Crank pos. sensors when I took it for a test ride it petered out, restarted and limped home. I've noticed that when it reaches operating temp. it sputters and when scanned PO 335 pops up again. Is there anyone who's experienced this before? Like I said new sensors and still conks out under load!
Thanks,
Carlo
My 2004 coupe stalled out on me in the drive ( when it reached operating temp. ), with my scanner I pulled an PO335 code, I've since replaced the Cam and Crank pos. sensors when I took it for a test ride it petered out, restarted and limped home. I've noticed that when it reaches operating temp. it sputters and when scanned PO 335 pops up again. Is there anyone who's experienced this before? Like I said new sensors and still conks out under load!
Thanks,
Carlo
Join Date: Jul 2009
Location: Central South Carolina
Age: 69
Posts: 5,842
Received 375 Likes
on
325 Posts
Re: PO335, replaced Cam & Crank sensor PO335 code remains
Hey Guys,
My 2004 coupe stalled out on me in the drive ( when it reached operating temp. ), with my scanner I pulled an PO335 code, I've since replaced the Cam and Crank pos. sensors when I took it for a test ride it petered out, restarted and limped home. I've noticed that when it reaches operating temp. it sputters and when scanned PO 335 pops up again. Is there anyone who's experienced this before? Like I said new sensors and still conks out under load!
Thanks,
Carlo
My 2004 coupe stalled out on me in the drive ( when it reached operating temp. ), with my scanner I pulled an PO335 code, I've since replaced the Cam and Crank pos. sensors when I took it for a test ride it petered out, restarted and limped home. I've noticed that when it reaches operating temp. it sputters and when scanned PO 335 pops up again. Is there anyone who's experienced this before? Like I said new sensors and still conks out under load!
Thanks,
Carlo
Sorry for this trouble, did you install BOSCH only sensors? This car is very finnicky on use of BOSCH sensors. Many had to reorder the right brand (did I say BOSCH). Hope you get it worked out!
Re: PO335, replaced Cam & Crank sensor PO335 code remains
I ran a Chinese rip off for almost 3 years, just recently went back to good ole Bosch when Annie started acting up. She's all happy again now.
Re: PO335, replaced Cam & Crank sensor PO335 code remains
I ran a Chinese rip off for almost 3 years, just recently went back to good ole Bosch when Annie started acting up. She's all happy again now.
Re: PO335, replaced Cam & Crank sensor PO335 code remains
I will go for a Bosch
Thread
Thread Starter
Forum
Replies
Last Post
oldvintagedude
Troubleshooting & Technical Questions & Modifications
3
08-14-2015 06:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)