Rear Tow Hook Cover.

corfire · #1 (**permalink**)

I made a tow hook cover by cutting off the end of an old rubber/plastic chain saw bar guard similar to the one shown in the link. These are probably available at a chain saw store. I formed the plastic so that it wedges between the hook and the plastic cowling under it, so that it stays in place. I've attached a few pics.

http://www.baileysonline.com/itemdet...96+16&catID=56

crossfirefun · #2 (**permalink**)

Looks good. A great idea and inexpensive too.

andrew · #3 (**permalink**)

~ nice job on the cover... it turned out well.

my favorite thing is your signature ... cheap cheap cheap ...