View Poll Results: Would you be
I'm interested in purchasing this Carbon Fiber hood for the Crossfire in a forum bulk buy!
84.13%
Voters: 63. You may not vote on this poll
Vented Carbon Fiber Hood Design Status
Vented Carbon Fiber Hood Design Status
Alright guys, Good News. We have completed the design. Now it works like this....
When ever the Feeler reach 25 participants, we will then move forward with the Bulk Buy. I've paid to be a forum sponsor and also paid the Group Buy Fees, nevertheless this feeler will help us in promoting the product to help offset the group buy cost in the near future. The supplier is pushing me to get the ball rolling, and I would hate for all this work to be lost.
Shipping
Shipping will be very reasonable depending on your location, International sales are welcomed. And even better if you and a friend or three get your hoods shipped to the same address you can save. Local pick up are also welcomed.
Please PM me if you have any questions. If your not a forum member and you’re a guest contact me at crosseffects@gmail.com
The bulk buy will officially end 30 days after receiving the 25th participant deposit.
1) Hoods will be guaranteed to fit.
2) Hood pins will not be needed; nevertheless it’s your choice
"All aftermarket body kits / hoods are sold AS-IS with no implied warranty. Buyer is responsible for fees concerning installation and up keep of the products. Buyer understands that some products are for off-road use. Check with local state laws before order. Buyer understands their preference to use after market products and due to strict State Laws each buyer will be responsible for any damages/possible injury incurred due to any condition. All units are manufactured with fiberglass and carbon fiber. We recommend that a professional body shop perform the installation. "
1) Direct replacement to factory hood
2) One-piece lightweight fiberglass construction grants stability without sacrificing strength
3) Unbroken carbon fiber weave layer and true rolled edges provides for superior beauty
4) Signature glossy UV-protection clear coats adds durability and longevity
5) Functional hood vents helps Increase heat dissipation from engine bay
More Pictures can be found at the link below. I will update the album with more pictures /Higher Quality this weekend with Zero shadows!!!.
Pictures by aahtxb - Photobucket
(FEELER LIST) No Money Exchanged
1) rcompart *
2) Never_satisfied
3) PA/XFIRE
4) bowlman169
5) JimmySkullz
6) okeefe1961
7) GDrag
8) airborne82nddiv2003
9) Tnaski
10) texas t
11) ImportLabSRT
12) McHammer
13) Franc Rauscher
14) billvp
15) cmac
16) crossfirefrank
17) Violenteer
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
If I get any other design pics, they can be found at
Pictures by aahtxb - Photobucket
When ever the Feeler reach 25 participants, we will then move forward with the Bulk Buy. I've paid to be a forum sponsor and also paid the Group Buy Fees, nevertheless this feeler will help us in promoting the product to help offset the group buy cost in the near future. The supplier is pushing me to get the ball rolling, and I would hate for all this work to be lost.
Shipping
Shipping will be very reasonable depending on your location, International sales are welcomed. And even better if you and a friend or three get your hoods shipped to the same address you can save. Local pick up are also welcomed.
Please PM me if you have any questions. If your not a forum member and you’re a guest contact me at crosseffects@gmail.com
The bulk buy will officially end 30 days after receiving the 25th participant deposit.
1) Hoods will be guaranteed to fit.
2) Hood pins will not be needed; nevertheless it’s your choice
"All aftermarket body kits / hoods are sold AS-IS with no implied warranty. Buyer is responsible for fees concerning installation and up keep of the products. Buyer understands that some products are for off-road use. Check with local state laws before order. Buyer understands their preference to use after market products and due to strict State Laws each buyer will be responsible for any damages/possible injury incurred due to any condition. All units are manufactured with fiberglass and carbon fiber. We recommend that a professional body shop perform the installation. "
1) Direct replacement to factory hood
2) One-piece lightweight fiberglass construction grants stability without sacrificing strength
3) Unbroken carbon fiber weave layer and true rolled edges provides for superior beauty
4) Signature glossy UV-protection clear coats adds durability and longevity
5) Functional hood vents helps Increase heat dissipation from engine bay
More Pictures can be found at the link below. I will update the album with more pictures /Higher Quality this weekend with Zero shadows!!!.
Pictures by aahtxb - Photobucket
(FEELER LIST) No Money Exchanged
1) rcompart *
2) Never_satisfied
3) PA/XFIRE
4) bowlman169
5) JimmySkullz
6) okeefe1961
7) GDrag
8) airborne82nddiv2003
9) Tnaski
10) texas t
11) ImportLabSRT
12) McHammer
13) Franc Rauscher
14) billvp
15) cmac
16) crossfirefrank
17) Violenteer
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
If I get any other design pics, they can be found at
Pictures by aahtxb - Photobucket
Last edited by Mad_Med05X; 01-31-2011 at 03:41 PM.
Re: Vented Carbon Fiber Hood Design Status
Originally Posted by MikeR
So what does the new hood actually look like?? Any concept drawings?
Everything was done in AutoCad, but I can say the design inspiration was from a very $$$$$$ car OEM hood design. Have patience we will see soon. Hopefully the design exceed all expectations.
Last edited by Mad_Med05X; 01-29-2010 at 06:35 PM.
Join Date: Aug 2009
Location: Warner Robins, GA
Age: 63
Posts: 3,459
Likes: 0
Received 8 Likes
on
7 Posts
Re: Vented Carbon Fiber Hood Design Status
Originally Posted by bmorgan
No problem. Please post them when you have the opportunity. Many of us are excited to see the design. Can you describe where/how the hood is vented? Is it a cowl vent, or more like Jag XJ type of vents? Thanks
Lets just say it should represent the Jag, Jag vents, with water channels. The reason I can't fully tell you what the final product looks like is because the design is still in the prototype development stage. On the delivery date, when I'm able to test fit the prototype we will know all. I will be sure to have the STL people meet me to take pics, and evaluate the quality of the design work. FYI..... I should have some updated pics next week which would give us a litle more insight into the over all design.
Last edited by Mad_Med05X; 01-29-2010 at 07:38 PM.
Join Date: Aug 2009
Location: Warner Robins, GA
Age: 63
Posts: 3,459
Likes: 0
Received 8 Likes
on
7 Posts
Re: Vented Carbon Fiber Hood Design Status
THe dragon reminds me that that its been over a year for my design. I drove down and back from Va and in the rain both ways without water related issues.
It will be iteresting to see what a carbon hood wanna be will cost you when installed on the car. Mine is easy to copy and is not difficult to replicate. Yes Ill do a thermal eval to show the heat rejection benefits, as I was the first to get into cooling seriously. Supercooler, 180 stat, hood, under hood liner delete and under motor baffel delete, exhaust shielding, and eventually fan controller that I can release to the public forum.
WOODY
AAAAH GUYS I CANT EVEN COPY PREVIOUSLY TAKEN AND STORED PHOTOS. THIS IS NEW AND FURTHER DEGREDATION OF THE SITE............
SEE MY ALBUM ON THE HOOD PLEASE.
It will be iteresting to see what a carbon hood wanna be will cost you when installed on the car. Mine is easy to copy and is not difficult to replicate. Yes Ill do a thermal eval to show the heat rejection benefits, as I was the first to get into cooling seriously. Supercooler, 180 stat, hood, under hood liner delete and under motor baffel delete, exhaust shielding, and eventually fan controller that I can release to the public forum.
WOODY
AAAAH GUYS I CANT EVEN COPY PREVIOUSLY TAKEN AND STORED PHOTOS. THIS IS NEW AND FURTHER DEGREDATION OF THE SITE............
SEE MY ALBUM ON THE HOOD PLEASE.
Re: Vented Carbon Fiber Hood Design Status
not bad at all ... I definitely prefer it over stock, although I'd like something without the lines down the hood
I wouldn't know how to go about getting that done with a stock hood though. You said it is "easy to copy" ... does that mean if someone went down to a local body shop and showed them the picture of yours, the body shop should have no problem duplicating it?
I wouldn't know how to go about getting that done with a stock hood though. You said it is "easy to copy" ... does that mean if someone went down to a local body shop and showed them the picture of yours, the body shop should have no problem duplicating it?
Originally Posted by waldig
THe dragon reminds me that that its been over a year for my design. I drove down and back from Va and in the rain both ways without water related issues.
It will be iteresting to see what a carbon hood wanna be will cost you when installed on the car. Mine is easy to copy and is not difficult to replicate. Yes Ill do a thermal eval to show the heat rejection benefits, as I was the first to get into cooling seriously. Supercooler, 180 stat, hood, under hood liner delete and under motor baffel delete, exhaust shielding, and eventually fan controller that I can release to the public forum.
WOODY
AAAAH GUYS I CANT EVEN COPY PREVIOUSLY TAKEN AND STORED PHOTOS. THIS IS NEW AND FURTHER DEGREDATION OF THE SITE............
SEE MY ALBUM ON THE HOOD PLEASE.
It will be iteresting to see what a carbon hood wanna be will cost you when installed on the car. Mine is easy to copy and is not difficult to replicate. Yes Ill do a thermal eval to show the heat rejection benefits, as I was the first to get into cooling seriously. Supercooler, 180 stat, hood, under hood liner delete and under motor baffel delete, exhaust shielding, and eventually fan controller that I can release to the public forum.
WOODY
AAAAH GUYS I CANT EVEN COPY PREVIOUSLY TAKEN AND STORED PHOTOS. THIS IS NEW AND FURTHER DEGREDATION OF THE SITE............
SEE MY ALBUM ON THE HOOD PLEASE.
Re: Vented Carbon Fiber Hood Design Status
Originally Posted by Mad_Med05X
It's nice, but I wanted to still have my OEM hood, ...
On another note.... I Cant wait to see the end result for this true full carbon fiber vented.hood design
On another note.... I Cant wait to see the end result for this true full carbon fiber vented.hood design
Re: Vented Carbon Fiber Hood Design Status
I suppose to receive a write up on the over all design effort including weights of the OEM hood and the aftermarket carbon fiber designs with an invoice up on completion. I believe the reason they chose to do this is because the design team has been burnt in the past due to not meeting individuals expected weight requirements and hood profiles.