Hood Idea
Hood Idea
Probably would not put on my car, but I have seen worse. The lines go well with the car. Now to make it functional would be nice.
Beautiful Chrysler Crossfire - Under 20,000 Miles
Beautiful Chrysler Crossfire - Under 20,000 Miles
Last edited by James1549; 09-01-2014 at 09:04 PM.
Re: Hood Idea
I doubt that you would find any gain but I do think if you installed a scoop to siphon the warm
air out from the engine bay, there might be some slight gain to be found. Just my opinion.
Re: Hood Idea
As you can see, the air slipstream travels well above most cometically pleasing style scoops to actually allow any measurable increase in cfm.
Any functional scoop that sits only a few inches off the hoods surface would really just create an open pathway for cooler outside air to be vacuumed into the intake.
Not a bad thing, but not comparable to the increase you would receive from a well designed CAI like the one offered by NeedsWings.
Last edited by +fireamx; 09-03-2014 at 09:38 AM.
Re: Hood Idea
This is what I did to cool the motor and avoid running afoul of the VA DMV hood issues. Used the steel hood and then did lots of testing, on track it allowed faster cool down without having to keep opening the hood, Enjoy, Woody
https://www.crossfireforum.org/g/album/4823560
https://www.crossfireforum.org/g/album/4823560
Join Date: Dec 2006
Location: Murfreesboro, TN
Age: 39
Posts: 6,348
Likes: 0
Received 10 Likes
on
10 Posts
Re: Hood Idea
This is what I did to cool the motor and avoid running afoul of the VA DMV hood issues. Used the steel hood and then did lots of testing, on track it allowed faster cool down without having to keep opening the hood, Enjoy, Woody
https://www.crossfireforum.org/g/album/4823560
https://www.crossfireforum.org/g/album/4823560
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)