Skreem module installation ??? - CrossfireForum.org
CrossfireForum.org  
- CLICK HERE TO GET RID OF THESE ADS -
Go Back   CrossfireForum.org > Off Topic > General

Reply
 
 
 
 
LinkBack Thread Tools
  #1 (permalink)  
Old 09-28-2011, 08:49 AM
 
Join Date: Sep 2011
Location: west haven,ct
Age: 31
Posts: 9
Send a message via Yahoo to jpeez20
Default Skreem module installation ???


Does anyone have a step by step guide to install a skreem module for a 04 crossfire .? Or any links .?
Reply With Quote
  #2 (permalink)  
Old 09-28-2011, 09:30 PM
ZORRO's Avatar
Forum Regular
 
Join Date: Jul 2007
Location: seattle
Posts: 209
Default Re: Skreem module installation ???


Quote:
Originally Posted by jpeez20
Does anyone have a step by step guide to install a skreem module for a 04 crossfire .? Or any links .?
I do not have picks. But what you do is remove the nuts then get a small gear puller to remove the wiper arms (yes on mine at least they are were on that tight) Then undo the torques/sp? bolts along the front of the panel under the wiper arms (just kind of pulls out of a gasket at the windshield) them right about the center of the firewall you will see what looks like a horn pointing up (cant mis it)

This is what I did to get the stupid thing to shut up. I just unplugged mine and never went back to replace it. Mine went bad three and a half states from home, figured if I replaced it I was just setting myself up for that again. Search under skreem and you may find a better description of how to do this. Have fun.


Zorro
Reply With Quote
  #3 (permalink)  
Old 09-29-2011, 06:30 AM
onehundred80's Avatar
Senior Member
 
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 75
Posts: 14,814
Default Re: Skreem module installation ???


Quote:
Originally Posted by ZORRO
I do not have picks. But what you do is remove the nuts then get a small gear puller to remove the wiper arms (yes on mine at least they are were on that tight) Then undo the torques/sp? bolts along the front of the panel under the wiper arms (just kind of pulls out of a gasket at the windshield) them right about the center of the firewall you will see what looks like a horn pointing up (cant mis it)

This is what I did to get the stupid thing to shut up. I just unplugged mine and never went back to replace it. Mine went bad three and a half states from home, figured if I replaced it I was just setting myself up for that again. Search under skreem and you may find a better description of how to do this. Have fun.
These instructions put you on the wrong side of the firewall, the SKREEM module is under the dash inside the car.
The instructions are in the Shop Manual, to be found here.
http://www.crossfireforum.org/forum/...tml#post111722


Perfection in design is achieved not when there is nothing more to add, but when there is nothing left to take away.
Antoine de Saint-Exupery
(I just love this quote)
Reply With Quote
  #4 (permalink)  
Old 09-29-2011, 06:53 AM
robby363's Avatar
Senior Member
 
Join Date: Sep 2007
Location: Middleboro, MA
Age: 52
Posts: 2,209
Default Re: Skreem module installation ???


Quote:
Originally Posted by jpeez20
Does anyone have a step by step guide to install a skreem module for a 04 crossfire .? Or any links .?
Why do you think you need a skreem module? And if you do replace it it has to be reprogrammed with a DRB III scan tool with the secret code that's programed into the skreem that's in your car now.


2005 SSB SRT-6 Coupe
New England XFires Charter Member (NEX)
http://www.facebook.com/pages/New-En...s/123402346919
Find us on facebook.

Click above and become a fan!
Reply With Quote
  #5 (permalink)  
Old 09-29-2011, 11:23 AM
ZORRO's Avatar
Forum Regular
 
Join Date: Jul 2007
Location: seattle
Posts: 209
Default Re: Skreem module installation ???


Quote:
Originally Posted by onehundred80
These instructions put you on the wrong side of the firewall, the SKREEM module is under the dash inside the car.
The instructions are in the Shop Manual, to be found here.
http://www.crossfireforum.org/forum/...tml#post111722
Yup, it sure is. I posted how to make it stop skreeming at you. Sorry I should have made that more clear. Thanks for the catch onehundred80.


Zorro
Reply With Quote
  #6 (permalink)  
Old 09-29-2011, 10:41 PM
onehundred80's Avatar
Senior Member
 
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 75
Posts: 14,814
Default Re: Skreem module installation ???


Quote:
Originally Posted by jpeez20
Does anyone have a step by step guide to install a skreem module for a 04 crossfire .? Or any links .?
You have started three threads in the General section, this is the wrong place. The forum description is about General topics not Crossfire topics. If this thread goes through the new posts list too quickly it will be ignored.
PS whatever happened to the $3,000 bill? We like feedback on here. WIN module?


Perfection in design is achieved not when there is nothing more to add, but when there is nothing left to take away.
Antoine de Saint-Exupery
(I just love this quote)

Last edited by onehundred80; 09-29-2011 at 10:43 PM.
Reply With Quote
  #7 (permalink)  
Old 10-03-2011, 06:43 AM
 
Join Date: Sep 2011
Location: west haven,ct
Age: 31
Posts: 9
Send a message via Yahoo to jpeez20
Default Re: Skreem module installation ???


Oh sorry about that..well chrysler told me that I needed a win module and new key ..so I began ordering parts as soon as they told me this because I haven't had my car in a month. The win module is the same as the skreem module ..just another word for it. Win means wireless ignition node ..either way my car isn't starting ad I wanted to see if there was someone outside of chrysler who would fix this ..but everyone says no. Hopefully its just the win module and nothing else ...only had the car for 2 weeks ..lucky me. The diagnoses from chrysler was that I needed those two parts skreem and a new key ..so we will find out tomm.if this is true. Everything turns on in my car but the engine..
Reply With Quote
  #8 (permalink)  
Old 11-17-2011, 05:16 PM
 
Join Date: Nov 2011
Posts: 32
Default Re: Skreem module installation ???


Did this fix the problem mate?
Reply With Quote
 
 
 
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Black SRT6 in Colorado - Very Nice - Low Miles - Tools plus many extras MAXIMUM Cars For Sale 7 08-04-2015 11:04 PM
Ignition key gets stuck / throttle cable module REYMARTZ Engine, Exhaust, Transmission and Differential 5 07-31-2015 09:59 PM
Summary - 5 Years of Ownership / And Costs PNA All Crossfires 7 07-31-2015 03:12 PM
Looking to see pics of the OEM humidor installed mattnelson71 All Crossfires 0 07-28-2015 12:52 PM
Wiper Maintenance - Please don't make my mistake hecti Exterior & Lighting 0 07-27-2015 03:31 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:27 PM.