Help... 2005 crossfire stops, doesn't start
Help... 2005 crossfire stops, doesn't start
Hi
Occasionally the vehicle stops. The temperature display shows zero, the cooling fan is running at maximum.When I turn contacts , The engine is not spinning. Sometimes after a few attempts, sometimes after 5-10 minutes starting.
can you help me..! Please
Occasionally the vehicle stops. The temperature display shows zero, the cooling fan is running at maximum.When I turn contacts , The engine is not spinning. Sometimes after a few attempts, sometimes after 5-10 minutes starting.
can you help me..! Please
Join Date: Jun 2009
Location: Fort Worth, Texas
Age: 64
Posts: 13,451
Received 879 Likes
on
685 Posts
Re: Help.. 2005 crossfire stops , doesn't start
The engine stopping and the cooling fan running at high speed mean that the "Engine Control Relay" output from the Relay control Module is not getting to the ECM.
THis is almost always a failure in the Relay Control Module. One of two issues is happening:
Try this:
https://www.crossfireforum.org/forum...-no-start.html
THis is almost always a failure in the Relay Control Module. One of two issues is happening:
- The Engine Control Relay's contacts are bad.
- The solder somewhere on the board in the Engine Control Relay's path is fractured.
Try this:
https://www.crossfireforum.org/forum...-no-start.html
Thread
Thread Starter
Forum
Replies
Last Post
knoxxxy
Troubleshooting & Technical Questions & Modifications
23
03-22-2017 08:21 PM
Osusannah
Exterior & Lighting
6
01-08-2017 10:27 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)