Scangauge II

crossfire2006 · #1 (**permalink**)

just bought/connected a Scangauge II to my car and took it out for a spin

i notice that the ignition advance was retarded by alot i think at idle was -16 and cruising at 1500rpm was at -30
could this be normal or do you think the scangauge is just reading the secondary plug timing?

i am running premium gas, outside temp is 61F

crookedview · #2 (**permalink**)

You have an NA Crossfire, right? What year? I was thinking of getting a ScanGauge to monitor stuffs, mostly MPG. Does that work?

My original post: ScanGauge II on a 2004 NA

crossfire2006 · #3 (**permalink**)

i have a 2006 base crossfire
all of the standard setting on the Scangauge II work
i only had the gauge for a few days now and been watching
my MPG, Intake temp, spark advance, and MAP
tried to setup the xgauge setting but have not figured out how to get it working

crazysomebody · #4 (**permalink**)

according to the scanguage website, it won't work with the crossfire ScanGaugeII - Compatible Vehicle List
if it really does work let me know plz, i want to purchase one

crossfire2006 · #5 (**permalink**)

yes it will work

crookedview · #6 (**permalink**)

Quote:

Originally Posted by crossfire2006

yes it will work

Have you gotten any more information from the ScanGauge than you posted previously?

crossfire2006 · #7 (**permalink**)

NOPE I JUST BEEN MONITORING THOSE SETTING BUT I DID FIND OUT THAT THE SCANGAUGE READS THE SECOND SPARK THAT IS WHY IT IS RETARDED THAT MUCH
I COULD NOT GET ANY OF THE xgauge TO WORK SO I GAVE UP ON THAT.
WHAT TYPE OF OTHER INFO ARE YOU LOOKING FOR?