Wheels, Brakes, Tires and Suspension Open discussion for tires/rims/lowering springs/brakes etc...

Noise after setting the emergency brake.

Thread Tools
 
  #1 (permalink)  
Old 06-07-2007, 04:29 PM
bsb's Avatar
bsb
bsb is offline
Thread Starter
Join Date: Jun 2007
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Question Noise after setting the emergency brake.

After setting the emergency brake, sometimes there is a very loud metal to metal rubbing sound when I take my foot off of the regular brake. It is loud enough that people will turn and look. It happens about 10% of the time and is more common when parking on an up hill slope. Any ideas? The car is a new 2006 (?) with about 1,500 miles. It is a 6 speed stick convertible.
 
  #2 (permalink)  
Old 06-07-2007, 08:06 PM
Maxwell's Avatar
Senior Member
Join Date: Dec 2006
Posts: 2,881
Likes: 0
Received 3 Likes on 3 Posts
Default Re: Noise after setting the emergency brake.

do you hear it when driving or when your parked while the hand brake is pulled?
 
  #3 (permalink)  
Old 06-07-2007, 08:20 PM
Join Date: May 2007
Location: Roanoke, Virginia
Posts: 68
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Noise after setting the emergency brake.

Sound like maybe a drive line problem, U-Joint bolt or mounts. Have the dealer check it out it's still under warranty, I hope.
 
  #4 (permalink)  
Old 06-08-2007, 12:07 AM
Maxwell's Avatar
Senior Member
Join Date: Dec 2006
Posts: 2,881
Likes: 0
Received 3 Likes on 3 Posts
Default Re: Noise after setting the emergency brake.

Originally Posted by DMS Xfire
Sound like maybe a drive line problem, U-Joint bolt or mounts. Have the dealer check it out it's still under warranty, I hope.
what made you come to that conclusion?
 
  #5 (permalink)  
Old 06-08-2007, 12:52 AM
bsb's Avatar
bsb
bsb is offline
Thread Starter
Join Date: Jun 2007
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Question Re: Noise after setting the emergency brake.

The noise occurs after the motor has already been turned off and the emergency brake has already been pulled as far back as it will go. After both of these things (engine off and emergency brake on), I take my foot of the regular brake and the noise occurs. It never occurs when I use my brakes while driving. The dealer claims it is normal and due to the fact that the emergency brake is cable operated. Anyone else have this problem?
 
  #6 (permalink)  
Old 06-08-2007, 03:34 AM
brhertel's Avatar
Forum Regular
Join Date: May 2006
Location: q, qq
Posts: 377
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Noise after setting the emergency brake.

I have that too. The linkage of the E-brake needs to be lubed. My dealer did it for me.

Here's the link to the previous post regarding this issue:

https://www.crossfireforum.org/forum...ghlight=squeak
 

Last edited by brhertel; 06-08-2007 at 03:36 AM.
  #7 (permalink)  
Old 06-08-2007, 08:40 AM
bsb's Avatar
bsb
bsb is offline
Thread Starter
Join Date: Jun 2007
Posts: 9
Likes: 0
Received 1 Like on 1 Post
Default Re: Noise after setting the emergency brake.

Originally Posted by brhertel
I have that too. The linkage of the E-brake needs to be lubed. My dealer did it for me.

Here's the link to the previous post regarding this issue:

https://www.crossfireforum.org/forum...ghlight=squeak
In your original post, you described the noise as a squeak when you get out of the car. Mine sounds like a metal to metal grind when I take my foot of the regular brake (engine off, emergency brake already on). I am still sitting in the car. Does that sound like the same thing you had?
 
  #8 (permalink)  
Old 06-09-2007, 11:21 AM
Join Date: Dec 2004
Location: coconut creek,fl
Age: 52
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Noise after setting the emergency brake.

are you on an incline or a hill when it happens ? it is nothing more than the weight of the car moving itself slightly. since the ebrake handle is up, the rear pads are touching the rotor, the car moves slightly and the sound you hear is the rotor turning with the pad gripping it. happens to me all the time.
 
  #9 (permalink)  
Old 06-10-2007, 04:32 AM
brhertel's Avatar
Forum Regular
Join Date: May 2006
Location: q, qq
Posts: 377
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Noise after setting the emergency brake.

I guess my noise wasn't a squeak, it was more of a metallic sound. It may be what the previous poster said as well.
 
  #10 (permalink)  
Old 06-10-2007, 02:26 PM
Maxwell's Avatar
Senior Member
Join Date: Dec 2006
Posts: 2,881
Likes: 0
Received 3 Likes on 3 Posts
Default Re: Noise after setting the emergency brake.

Yeah, I get the metallic sounds too, it comes from the back of the car, maybe the disc brakes dragging or the emergent shoes rattling around on the disc hat.
 
  #11 (permalink)  
Old 06-11-2007, 11:14 AM
ShawnQ's Avatar
Senior Member
Join Date: May 2007
Location: Bayou Vista, TX
Age: 40
Posts: 1,325
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Noise after setting the emergency brake.

This noise is probably 'normal' from the rotors 'dragging' just a bit prior to the e-brake working.

Not sure if yours is louder than mine or not, or if it is just a bit of over-exaggeration, but mine does the same thing.

Set the e-brake, and then let your foot off of the brake pedal, and you'll hear the brake set. Not sure there is much you can do about it. It is probably a bit more excessive in these cars due to the lack of a rear seat and a trunk allowing a short distance and lack of sound-deadening between you and the rear axle.

SQ
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ty_ty37
Crossfire Coupe
26
10-10-2015 08:30 AM
livefreeordie
WTB - Items/Parts Wanted to Buy - Archive
0
09-22-2015 08:13 PM
Valk
Parts/Accessories for sale - Archive
0
09-17-2015 11:43 AM
caseydeankopp
WTB - Items/Parts Wanted to Buy - Archive
12
09-13-2015 07:25 PM
BEATv1
Crossfire Coupe
13
09-10-2015 12:58 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Noise after setting the emergency brake.



All times are GMT -4. The time now is 10:55 AM.