CrossfireForum - The Chrysler Crossfire and SRT6 Resource - View Single Post

Jul 17, 2010 | 12:15 PM

#29 (permalink)

onehundred80

Senior Member

Joined: Apr 2006

Posts: 25,432

Likes: 648

From: Ontario

Re: Oem Tire Pressure Is Wrong

Quote:

Originally Posted by Montana Crossfire

Hey Raj;
Do you really think a "Run Flat" tire would have a 50lb. recomended tire pressure?
I ran my SRT only this morning at 145mph. If you run these tires at that pressure at that speed for any length of time they get REALLY HOT. I run my tires depending on conditions from 34.5 -36.lbs pressure.
Sorry but your info is... Wrong.
But I have to say the 80%-85% and the Sub set ZxY minus W times this and that sounded good.
I can't run Z's on mine because I have run at 174mph and plan on 190mph this season...
Mike

Run flats who's got them as standard?
Some of these statements are the opposite to what is normally recommended. What pressures are you going to use at 190mph?

I think a lot of this is hot air no matter what the pressure. Your so called CAI will not help you in any way, but it will give you all the hot air you need.

Reply

0