View Single Post
Old Apr 25, 2012 | 05:17 PM
  #8 (permalink)  
jmk41's Avatar
jmk41
Forum Regular
Joined: Mar 2011
Posts: 548
Likes: 2
From: Lake Jackson, TX
Default Re: Wheel Bearings gone bad on any one?

Originally Posted by alaxfire
also turn the wheel to different positions after jacking it up, and check the play by grabbing top and bottom of wheel/tire and pulling pushing, should be VERY LITTLE play ......
Agreed! That's what they do for state inspections to check them. My front left went at 50500 wheel bearings take a ton of abuse! At that mileage I think it's a tire. Ever hit a pot hole or bump kinda hard recently? low profiles suck ***! It takes little to nothing for a belt to break in the tire check them all over for signs of uneven wear. Tire shops will look them over for free vrs a stealer ship!
 
Reply