The battery went dead on my 2005 and I had to open the hood to jump it off since the door locks would not open. Found a thread on this forum that helped, which was good because NO ONE could get the doors open.

After loosening the 10MM bolts on the latch I was able to open the hood and jump the car but unfortunately the latch was still attached to the hood and the release cable and I guess a sensor cable became detached.

Before I take it to a shop I wanted to see if I could fix it but I'm not sure what the latch assembly looked like or how it goes back together. Attached are some pictures of what it looks like. If anyone has any closeup pictures pf the assembly or knows how to get this back together it would be greatly appreciated.