Originally Posted by
Cbridge
Crossfire still NOT cranking. Installed new ground wire between battery and engine/transmission housing and No difference. All lights work, keyfob works, dash lights work, but starter Not crankingg. Dont see power getting to S wire on starter. Could this be a SKREEM problem.
Skreem doesn't "disable" the starter till the third start attempt.. we have a Texas owner whose SRT will only start with 13 plus volts applied (boosted start with new battery tested and proven good) .. "normal" stuff checked and can't figure this one out.. replacing the starter (PITA job) seems to be the only attempt to resolve left.