U-joint replaced around $100.00 - CrossfireForum - The Chrysler Crossfire and SRT6 Resource

All Crossfires A place to discuss any model of the Crossfire.

U-joint replaced around $100.00

Reply

 
 
 
  #1 (permalink)  
Old 02-02-2018, 04:32 PM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default U-joint replaced around $100.00

I now have a guy that will replace your U-joint (the one in the middle of your drive shaft) for around $100.00 + shipping before this you had to replace the driveshaft. this is not the flex joints on each end of the driveshaft . you only need to send the rear(short part of drive shaft) see the pictures. if interested let me know . jim
 
Attached Images
File Type: jpg
IMG_0545.JPG (1.77 MB, 21 views)
File Type: jpg
IMG_0544.JPG (1.76 MB, 19 views)

Last edited by amx1397; 02-02-2018 at 04:34 PM.
Reply With Quote
  #2 (permalink)  
Old 02-02-2018, 08:08 PM
James1549's Avatar
Senior Member
Join Date: May 2008
Location: Cincinnati ( Delhi )
Posts: 9,660
Default Re: U-joint replaced around $100.00

I am curious why the driveshaft needed replaced for u joints?
 
Reply With Quote
  #3 (permalink)  
Old 02-02-2018, 08:25 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 78
Posts: 20,143
Default Re: U-joint replaced around $100.00

Originally Posted by James1549 View Post
I am curious why the driveshaft needed replaced for u joints?
Old shaft and new u-joint.
 
Reply With Quote
  #4 (permalink)  
Old 02-03-2018, 09:13 AM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by James1549 View Post
I am curious why the driveshaft needed replaced for u joints?
why not just replace the u-joint right? well chrysler and mercedes do not sell the u-joint only . their are only a few places that do, .,I did mine a few years back,and had to use a used u-joint. because out of 10 to 15 shops they all said no. so if you call a driveshaft shop ,they will tell you bring it in and i'm sure we can do it,,when they see it they say no we can't, save a trip just say the u-joint is pined, they will say sorry don't have the tool,, the pining tool cost is $500.00 to 700.00, I found a mechanic that his father use to work for the co. that built and balanced some of the drive shafts for mercedes. he told me he has the tool he just has to find it. if someone finds it can be done other than welding let me know. if welding it ,,the complete shaft has to be rebalanced . I have a spare driveshaft,(srt) remember the srt and the limited do not interchange. jim

special note: a one piece can be made for around $500.00 and new stock driveshaft on ebay is $700.00 to $2000.00
 

Last edited by amx1397; 02-03-2018 at 09:20 AM.
Reply With Quote
  #5 (permalink)  
Old 02-03-2018, 09:33 AM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Caledon, Ontario
Age: 78
Posts: 20,143
Default Re: U-joint replaced around $100.00

Now I am completely confused, nowhere in the first post does it say that the shaft is replaced, then we are told that it is replaced because the parts are pinned together, then we are told that someone has a pinning tool, and assume it is not replaced.
First you cannot buy a u-joint then you can. I assume the u-joint is pinned to stop it flying apart and having the shafts smash around.
Very in Canada.
The shaft in the picture looks like it has had seven shades of ***** beaten out of it and is only fit for scrap.
A one piece shaft would mean that the flex joints see more work, I see them as a bit flaky anyway and thus they would need replacement sooner.
 

Last edited by onehundred80; 02-03-2018 at 09:40 AM.
Reply With Quote
  #6 (permalink)  
Old 02-03-2018, 10:01 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

I found a shop in indiana that would do a 1 piece steel shaft for $300 or $350, ahhh, no it is not a 1 piece shaft using two flex discs, with the angles, that doesn't even make sense. Making the mounting plate would be easy.
And gets rid of the flex discs and the carrier bearing.
My work location changed and was not able to get mine done, I wanted to try for a aluminum anyway, the problem with that is the slip joint in the drive shaft.
But I am in Nashville TN working now, should find a place when I get time to look around, haven't in past few months, city pricing be alittle higher though.
Make the single, need a slip joint, and make a mounting plate to bolt in place of the flex disc and can bolt on new mounts for u joints.
I have changed several u joints with just a good vise and some sockets, usually use a torch to take joint out, alot easier and does not hurt drive shaft, well unless you don't have a clue what a torch is.
 
Reply With Quote
  #7 (permalink)  
Old 02-03-2018, 11:22 AM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by Speedy4x4 View Post
I found a shop in indiana that would do a 1 piece steel shaft for $300 or $350, ahhh, no it is not a 1 piece shaft using two flex discs, with the angles, that doesn't even make sense. Making the mounting plate would be easy.
And gets rid of the flex discs and the carrier bearing.
My work location changed and was not able to get mine done, I wanted to try for a aluminum anyway, the problem with that is the slip joint in the drive shaft.
But I am in Nashville TN working now, should find a place when I get time to look around, haven't in past few months, city pricing be alittle higher though.
Make the single, need a slip joint, and make a mounting plate to bolt in place of the flex disc and can bolt on new mounts for u joints.
I have changed several u joints with just a good vise and some sockets, usually use a torch to take joint out, alot easier and does not hurt drive shaft, well unless you don't have a clue what a torch is.
one piece shaft, you are correct on the mounting plates ,on one end of the shaft would be a double u-joint and at the transmission plate would be a single u-joint, and yes it would have the slip shaft ( telescopic ) in the middle, I was told each end plate is around 50 to 75. I too have changed a lot of u-joints with a vice ,and or a press and sockets. but those have clips the crossfire does not, the pining tool centers the u-joint and pins it.
if you find a one piece shaft for 350,, and it is a bolt in ,put me down for one. I looked at one in this guy's shop he had made , it looks good.
 
Reply With Quote
  #8 (permalink)  
Old 02-03-2018, 11:33 AM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by onehundred80 View Post
Now I am completely confused, nowhere in the first post does it say that the shaft is replaced, then we are told that it is replaced because the parts are pinned together, then we are told that someone has a pinning tool, and assume it is not replaced.
First you cannot buy a u-joint then you can. I assume the u-joint is pinned to stop it flying apart and having the shafts smash around.
Very in Canada.
The shaft in the picture looks like it has had seven shades of ***** beaten out of it and is only fit for scrap.
A one piece shaft would mean that the flex joints see more work, I see them as a bit flaky anyway and thus they would need replacement sooner.
don't be confused, for the last 5 years i have been told we couldn't replace the u-joint,,which means buy a new or used driveshaft,, now i found a guy that can replace the u-joint, I still don't know where to get this u-joint, i have tried over 15 shops, and just as many auto parts stores and on line with NO LUCK. My guy says he can get it.

you get your driveshaft back still balanced just with a new u-joint

in the pic is the way it came out of the car and yes the center bearing rubber boot was gone and the shaft came loose at around 60mph, banging like no end, we all have been there before, the driveshaft is not hurt,not scrap. when it gets it new u-joint it will go 10.55 at 130 just like it did before. are u still confused?
 
Reply With Quote
  #9 (permalink)  
Old 02-03-2018, 11:36 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

Why are you thinking it needs a double u joint on the back?
Do not have sharp angles for needing a double.
And just a single on both ends with a slip.

Just curious why a double, doesn't make sense to me, for a few reasons, other than the angle.
 
Reply With Quote
  #10 (permalink)  
Old 02-03-2018, 07:01 PM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by Speedy4x4 View Post
Why are you thinking it needs a double u joint on the back?
Do not have sharp angles for needing a double.
And just a single on both ends with a slip.

Just curious why a double, doesn't make sense to me, for a few reasons, other than the angle.
it is not me ,I though one on each end was the way to go also. this guy said he has made a lot of them, most for jeeps and c300's, and bmw's. and the one he showed me was with a double on one end and single close to the slip joint,, oh it was about 45" long , check it out with what you find. jim
 
Reply With Quote
  #11 (permalink)  
Old 02-09-2018, 08:49 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

I wondering if he was wanting to use the double so he could have a shorter driveshaft.

Shame a aluminum slip joint was not so hard to find.

Do you happen to have a flex disc lying around to measure the bolt hole diameter or get the radius.
And bolt hole size?

TY
Speedy
 
Reply With Quote
  #12 (permalink)  
Old 02-09-2018, 10:32 AM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 74
Posts: 10,976
Default Re: U-joint replaced around $100.00

The bolts are M12 X 1.5 X 62-ZNS3
 
Reply With Quote
  #13 (permalink)  
Old 02-09-2018, 10:44 AM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by Speedy4x4 View Post
I wondering if he was wanting to use the double so he could have a shorter driveshaft.

Shame a aluminum slip joint was not so hard to find.

Do you happen to have a flex disc lying around to measure the bolt hole diameter or get the radius.
And bolt hole size?

TY
Speedy
on our drive shaft he would NOT use a double u-joint but a single on each end. the double is not needed . I do have a flex disc, using the triangle that bolts to our tranny and diff. ,,, is 3 3/4" and hole is for a 1/2" bolt . from what he said we need the pilot bushing on both ends of the driveshaft as it is now..
look on driveshaftshop.com

I was thinking of the end plate would incorporate the pilot bushing, male on one side and the female on the other side to aline everything. or the pilot bushing on the drive plate reaching through the spacer(that takes the place of the flex disc) to the diff and tranny bushing jim
 
Attached Images
File Type: jpg
IMG_0583[2].JPG (1.95 MB, 13 views)
Reply With Quote
  #14 (permalink)  
Old 02-09-2018, 11:13 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

TY for the info.

Bolt hole to bolt hole, 3 3/4
From bolt hole to inbetween two holes probably 4"
Found already made aluminum 3 bolt adapter flange yoke, but it is for bolt hole diameter of 4.3"
Since they make them they could drill to the right diameter.

The pilot bushing would just be making sure the adapter is centered like a hubcentric spacer for our aftermarket wheels.
 
Reply With Quote
  #15 (permalink)  
Old 02-09-2018, 11:22 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

Also found

08-14 challenger, 10+ camaro
3.25 diameter, Billet 1350 3-bolt flange for 2004 GTO (Also fits C5-C6 Corvette / 3 Series BMW -pattern is 3.25" / 82.77mm from one bolt hole to the next)

Billet 1350 3-Bolt Flange for 2010+ Camaro / G8 / 2008-14 Challenger / 2005-2006 GTO (Pattern is 3.730" / 94.74mm from one bolt hole to the next)

That 3.73 might be a perfect match ??????
 
Reply With Quote
  #16 (permalink)  
Old 02-09-2018, 12:08 PM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

Or if the flange on the output shaft of trans and the flange one the pinion can be changed out from the 3 bolt to one of the mercedes 4 bolt flanges, then there are many options for cheap 4 bolt yoke flanges from $24 and up.
 
Reply With Quote
  #17 (permalink)  
Old 02-09-2018, 01:14 PM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by Speedy4x4 View Post
Or if the flange on the output shaft of trans and the flange one the pinion can be changed out from the 3 bolt to one of the mercedes 4 bolt flanges, then there are many options for cheap 4 bolt yoke flanges from $24 and up.
yes the 3 to 4 bolt flange can be changed,, I will find out what mercedes these flanges will come from jim
 
Reply With Quote
  #18 (permalink)  
Old 02-09-2018, 01:23 PM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

Here is a start


Vehicle Compatibility Chart


YEAR MAKE MODEL TRIM ENGINE NOTES
2006 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2005 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2005 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2004 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2004 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2003 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CL55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CL600 Base Coupe 2-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz S55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz S600 Base Sedan 4-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
2001 Mercedes-Benz CL55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz CL600 Base Coupe 2-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz S55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz S600 Base Sedan 4-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
2000 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2000 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1999 Mercedes-Benz CL600 Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1999 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1998 Mercedes-Benz CL600 Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1998 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1997 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1996 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz E420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz S350 Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1995 Mercedes-Benz S420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz S500 Base Sedan 4-Door
1995 Mercedes-Benz SL500 Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz E420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz E500 Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz S350 Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1994 Mercedes-Benz S420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz S500 Base Sedan 4-Door
1994 Mercedes-Benz SL500 Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 300SD Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1993 Mercedes-Benz 400E Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 400SEL Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500E Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SEC Base Coupe 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SEL Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 600SEC Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 600SL Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 300SD Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1992 Mercedes-Benz 400E Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 400SE Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500E Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500SEL Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1991 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1990 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
 
Reply With Quote
  #19 (permalink)  
Old 02-09-2018, 10:11 PM
amx1397's Avatar
Senior Member
Thread Starter
Join Date: Apr 2008
Location: Ft. Lauderdale Fl.
Age: 75
Posts: 4,981
Default Re: U-joint replaced around $100.00

Originally Posted by Speedy4x4 View Post
Here is a start


Vehicle Compatibility Chart


YEAR MAKE MODEL TRIM ENGINE NOTES
2006 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2005 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2005 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2004 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2004 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2003 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CL55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CL600 Base Coupe 2-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CLK55 AMG Base Convertible 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz S55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz S600 Base Sedan 4-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2002 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
2001 Mercedes-Benz CL55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz CL600 Base Coupe 2-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz CLK55 AMG Base Coupe 2-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz S55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz S600 Base Sedan 4-Door 5.8L 5786CC V12 GAS SOHC Naturally Aspirated
2001 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
2000 Mercedes-Benz E55 AMG Base Sedan 4-Door 5.5L 5439CC 335Cu. In. V8 GAS SOHC Naturally Aspirated
2000 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1999 Mercedes-Benz CL600 Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1999 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1998 Mercedes-Benz CL600 Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1998 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1997 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1996 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz E420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz S350 Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1995 Mercedes-Benz S420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz S500 Base Sedan 4-Door
1995 Mercedes-Benz SL500 Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1995 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz E420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz E500 Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz S350 Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1994 Mercedes-Benz S420 Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz S500 Base Sedan 4-Door
1994 Mercedes-Benz SL500 Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1994 Mercedes-Benz SL600 Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 300SD Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1993 Mercedes-Benz 400E Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 400SEL Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500E Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SEC Base Coupe 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SEL Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 600SEC Base Coupe 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1993 Mercedes-Benz 600SL Base Convertible 2-Door 6.0L 5987CC V12 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 300SD Base Sedan 4-Door 3.4L 3449CC l6 DIESEL SOHC Turbocharged
1992 Mercedes-Benz 400E Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 400SE Base Sedan 4-Door 4.2L 4196CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500E Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500SEL Base Sedan 4-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1992 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1991 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
1990 Mercedes-Benz 500SL Base Convertible 2-Door 5.0L 4973CC V8 GAS DOHC Naturally Aspirated
Greek to me. ! would any or all have the 4 bolt and replace the 3 bolt ,with no leaks?
 
Reply With Quote
  #20 (permalink)  
Old 02-10-2018, 07:40 AM
Speedy4x4's Avatar
Senior Member
Join Date: Oct 2013
Location: Southern IL.
Posts: 1,591
Default Re: U-joint replaced around $100.00

Originally Posted by amx1397 View Post
Greek to me. ! would any or all have the 4 bolt and replace the 3 bolt ,with no leaks?
These all have 4 bolt, and they use the same flex disc.
But, figuring out with has the same spline output shaft.
Since it looks like the bigger engines had the 4 bolt flanges, and probably larger output shafts in transmission, so would be isfferwnt spline counts.
Seals, if different could take to napa and say you want a seal to fit thus with a diameter of this.
Didn't some of those on the list have the same auto as what is in the crossfire?
Mine is the nsg370 manual.
Biggest thing if we could figure out the bolt hole diameter if the 4 bolt, then can double check for yoke flanges, then would have to find some or a business that has some that would send measurements.
 
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
amx1397
All Crossfires
0
04-09-2017 06:26 PM
burnzboy2
Troubleshooting & Technical & Modifications
15
11-01-2015 02:17 PM
+fireamx
Other Cars
0
11-07-2013 11:45 AM
prindere
Wheels, Brakes, Tires and Suspension
0
11-09-2009 08:41 PM
cgocifer
Wheels, Brakes, Tires and Suspension
8
03-03-2009 04:41 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)