Audio, Video and Electronics Have audio, video or electronics questions? Post them in here.

UltraGauge mounting suggestions

Thread Tools
 
Old Dec 3, 2010 | 07:24 PM
  #1 (permalink)  
Hindin's Avatar
Thread Starter
Joined: Mar 2010
Posts: 251
Likes: 33
From: Alaska
Default UltraGauge mounting suggestions

For those of you who have installed the UltraGauge OBD II for daily use where have you chosen to locate it.
Thanks you in advance for your suggestions.
Roadster looking for input.
 
Reply
Old Dec 3, 2010 | 08:29 PM
  #2 (permalink)  
TomStratRT's Avatar
Forum Regular
Joined: Apr 2010
Posts: 658
Likes: 2
From: Maryland
Default Re: UltraGauge mounting suggestions

Mine is mounted to the left of the steering wheel, just above the air vent. I'll take pics tomorrow. It makes for a clean way to hide the OBDII cord. I love this device. One of the best things I've bought for any vehicle.
 
Reply
Old Dec 3, 2010 | 10:31 PM
  #3 (permalink)  
Hindin's Avatar
Thread Starter
Joined: Mar 2010
Posts: 251
Likes: 33
From: Alaska
Default Re: UltraGauge mounting suggestions

Thanks Tom, would love to see pics of have you have yours mounted. I've had mine for a while and haven't figured out a good spot to mount it yet.
 
Reply
Old Dec 5, 2010 | 07:42 PM
  #4 (permalink)  
DavidOv54367's Avatar
Joined: Nov 2009
Posts: 141
Likes: 0
Default Re: UltraGauge mounting suggestions

bumping for pics
 
Reply
Old Dec 6, 2010 | 08:19 PM
  #5 (permalink)  
TomStratRT's Avatar
Forum Regular
Joined: Apr 2010
Posts: 658
Likes: 2
From: Maryland
Default Re: UltraGauge mounting suggestions

My bad. My digi cam battery stopped working and I can't find a replacement. I found my back up camera and will have pics up tomorrow for sure. Sorry for the delay.
 
Reply
Old Dec 7, 2010 | 10:37 AM
  #6 (permalink)  
former NXMX5's Avatar
Senior Member
Joined: Aug 2004
Posts: 1,740
Likes: 2
From: Long Island, NY
Default Re: UltraGauge mounting suggestions

I just ordered this yesterday itll be going same place as Tom's is mounted ("to the left of the steering wheel, just above the air vent.") because thats where my old Garmin used to be and it fit perfetly.
 
Reply
Old Dec 7, 2010 | 10:40 AM
  #7 (permalink)  
Hindin's Avatar
Thread Starter
Joined: Mar 2010
Posts: 251
Likes: 33
From: Alaska
Default Re: UltraGauge mounting suggestions

Hey Tom, mounted my UltraGauge in the area that you suggested and ran the wire under the fuse panel and down the trim on the door. See my gallery for pics (can't quite figure out how to load them into a thread). Hope this is how you did it. I also used velcro to mount the bracket to the dash. Thanks again for the suggestion.
Howard
 

Last edited by Hindin; Dec 7, 2010 at 10:42 AM.
Reply
Old Dec 7, 2010 | 06:54 PM
  #8 (permalink)  
TomStratRT's Avatar
Forum Regular
Joined: Apr 2010
Posts: 658
Likes: 2
From: Maryland
Default Re: UltraGauge mounting suggestions

Here they are. Sorry for the crappy quality.





 
Reply
Old Dec 10, 2010 | 10:46 AM
  #9 (permalink)  
former NXMX5's Avatar
Senior Member
Joined: Aug 2004
Posts: 1,740
Likes: 2
From: Long Island, NY
Default Re: UltraGauge mounting suggestions

i mounted it just like like Hindin did, except my wire runs through the vent right below it.

Thats got to be one of the most distracting things while driving!! On the first run, i was constantly looking to see what my numbers were. i think it might be safer to text than have that thing in the car.

Safe driving everyone
 
Reply
Old Dec 10, 2010 | 03:58 PM
  #10 (permalink)  
Hindin's Avatar
Thread Starter
Joined: Mar 2010
Posts: 251
Likes: 33
From: Alaska
Default Re: UltraGauge mounting suggestions

Not to worry NXMX5, When you get to be an old fart like me you you won't be able to see it unless you stop and put on your reading glasses.
 
Reply
Old Dec 11, 2010 | 02:05 AM
  #11 (permalink)  
DavidOv54367's Avatar
Joined: Nov 2009
Posts: 141
Likes: 0
Default Re: UltraGauge mounting suggestions

looks nice, i am really considering purchasing one of these
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
aerobluehal1
Canada
19
Oct 13, 2018 09:47 AM
steps
Crossfire Coupe
22
Apr 26, 2016 06:21 PM
2005 Ragtop
Wheels, Brakes, Tires and Suspension
7
Oct 3, 2015 03:01 PM
Billy22Bob
Crossfire SRT6
0
Oct 1, 2015 05:34 AM
ozkancab
New Member Introductions
1
Sep 25, 2015 10:55 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 01:35 PM.