CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Commercial Sponsor Classifieds (https://www.crossfireforum.org/forum/commercial-sponsor-classifieds/)
-   -   Special - Black Powder Coat Mesh Grille (https://www.crossfireforum.org/forum/commercial-sponsor-classifieds/41784-special-black-powder-coat-mesh-grille.html)

SRT SIX 04-06-2010 02:13 PM

Special - Black Powder Coat Mesh Grille
 
A forum member backed out of buying both upper and lower stainless mesh grilles that are black gloss powder coated. Regular price is $318 plus $40 S&H to the continental US.

This is not a high margin item and I need to recover the money I already laid out for them. First member with $299 (including shipping to the Continetal US) will get them.

Send your email address and I will bill via paypal. The will ship FedEx Ground (4 day delivery or less) immediately upon payment.

Thanks

https://www.crossfireforum.org/galle...ight_front.JPGhttps://www.crossfireforum.org/galle...left_front.JPG

mdaniels4 04-06-2010 02:15 PM

Re: Special - Black Powder Coat Mesh Grille
 
If mine were black I'd be on this like a cat on kitty litter. The black grille on the black car is beautiful.

ZORRO 04-06-2010 02:28 PM

Re: Special - Black Powder Coat Mesh Grille
 

Originally Posted by mdaniels4
If mine were black I'd be on this like a cat on kitty litter. The black grille on the black car is beautiful.

Took the words right out of my mouth. Black grill black car, beautiful!

FP 04-06-2010 04:49 PM

Re: Special - Black Powder Coat Mesh Grille
 
That black grill looks awesome. Much better than the chrome in this case. It doesn't look like the car is smiling...

oledoc2u 04-06-2010 05:49 PM

Re: Special - Black Powder Coat Mesh Grille
 
I waited a long time for that black grille....now, here's one for you SIX....since I have the aero blue one, any thoughts about a silver powder coat to match the silver on the car? I know, I always want something different....but that's just me....I still am looking for those "C" emblems without the "C"....any help there as well....just the black gloss disc...

SRT SIX 04-06-2010 06:02 PM

Re: Special - Black Powder Coat Mesh Grille
 
Not sure how the silver would look against the chrome wing. I am relatively sure it could be done in silver.

I will check to see what cost would be for a set of just plain black badges would be and send you a PM.


Originally Posted by oledoc2u
I waited a long time for that black grille....now, here's one for you SIX....since I have the aero blue one, any thoughts about a silver powder coat to match the silver on the car? I know, I always want something different....but that's just me....I still am looking for those "C" emblems without the "C"....any help there as well....just the black gloss disc...


FP 04-06-2010 08:56 PM

Re: Special - Black Powder Coat Mesh Grille
 

Originally Posted by oledoc2u
....I still am looking for those "C" emblems without the "C"....any help there as well....just the black gloss disc...

Me too....:cool:

blackroadster83 04-07-2010 07:41 AM

Re: Special - Black Powder Coat Mesh Grille
 
Let me know big6 if those lower peices are up for grabs, would match my upper, that I got from you!

BoilerUpXFire 04-07-2010 09:00 AM

Re: Special - Black Powder Coat Mesh Grille
 

Originally Posted by oledoc2u
I still am looking for those "C" emblems without the "C"....any help there as well....just the black gloss disc...


Originally Posted by FP
Me too....:cool:

Just go get a small piece of black vinyl (good quality of course), lay it over the chrysler emblem you want to overlay, use some heat to get it to lay down, and trim the edges with an exacto knife - done. :D

SRT SIX 04-09-2010 02:15 PM

Re: Special - Black Powder Coat Mesh Grille
 
Bump...

https://www.crossfireforum.org/galle...bs/front_c.JPG

oledoc2u 04-09-2010 06:27 PM

Re: Special - Black Powder Coat Mesh Grille
 

Originally Posted by SRT SIX

just wouldn't be the same John....I like Six's as it look factory...and shiny...lol....
I am looking at the chrome wing and trying to visualize the silver...you might be right Six...but let me know anyway....still trying to decide...

SRT SIX 04-09-2010 08:25 PM

Re: Special - Black Powder Coat Mesh Grille
 
They got back to me on the front and rear ovals in solid black. If I buy 24 total pcs they will cost me $10 each. Not bad if your'e only going to buy 2, but I will have to buy 24.

What if I run a special on the sets with the crome "C"

9 pcs
one Front Wing
one Rear Wing
four hub caps
one steering wheel
two key FOBs

https://www.crossfireforum.org/galle...s/full_set.JPG

Right now they are $30 plus S&H (I think this is a FANTASTIC price!)

You have to remember these are NOT decals, they are polyurethane domed badges. The design will not wear off and will not fade or peel. I can personally guarantee they will stay affixed to the car at speeds up to 130 MPH if applied properly (LOL).

So what is a fair price.....HMMMM?

BoilerUpXFire 04-12-2010 09:11 AM

Re: Special - Black Powder Coat Mesh Grille
 
I thought you were referring to a simple vinyl overlay, the ones Karl is making are quite a bit nicer. By the way I finally got my door sills on Karl, they look great ;)

SRT4man 05-30-2010 09:55 PM

Re: Special - Black Powder Coat Mesh Grille
 
Are the mesh grille pieces still available? If so, do they let the needswings dual CAI fit?

SRT SIX 05-30-2010 11:09 PM

Re: Special - Black Powder Coat Mesh Grille
 
Still have a set of black, others can be ordered.

I don't have the NW CAI however the mesh doesn't sit as far back as the stock. I would think it is fine. If you measure how far from the radiator the airfilters extend, I will let you know.


Originally Posted by SRT4man
Are the mesh grille pieces still available? If so, do they let the needswings dual CAI fit?


oledoc2u 05-31-2010 09:18 AM

Re: Special - Black Powder Coat Mesh Grille
 

Originally Posted by SRT SIX
Still have a set of black, others can be ordered.

I don't have the NW CAI however the mesh doesn't sit as far back as the stock. I would think it is fine. If you measure how far from the radiator the airfilters extend, I will let you know.

The grill actually helps with the needswings dual cai install......hope that helps....

oledoc2u 05-31-2010 09:19 AM

Re: Special - Black Powder Coat Mesh Grille
 
Six, I think I will order a set of the "C" emblems if you still have them up for sale...or should I say "on sale" lol....

SRT SIX 05-31-2010 11:15 AM

Re: Special - Black Powder Coat Mesh Grille
 
Doc, they are still available. You might want to hod off a bit though. Just might have something very special for the SRT very soon.

SRT SIX 05-31-2010 11:30 AM

Re: Special - Black Powder Coat Mesh Grille
 
The grille "special" is sold. New orders will be at the regular price. Thanks,

SRT4man, the grilles ship FedEx ground tomorrow.

Thanks

SRT4man 05-31-2010 12:12 PM

Re: Special - Black Powder Coat Mesh Grille
 
Thank you. I ordered the needswings intake today so lets hope ol' Doc isn't pulling my leg on helping it fit. Sorry you couldn't make it out to the SRT meet on Saturday, Doc. Read in another post about your sunburn so I understand. We will keep you posted on other meets in Indy and hope to see you there.


All times are GMT -4. The time now is 08:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands