2005 SSB SRT-6 Part Out thread
This is a tracking thread for interest in specific parts.
2005, SSB SRT-6, damage to left front fender, fascia, drivers door. Is a complete vehicle at this point. Delivery expected 12/30/2011. The following have expressed interest in the following parts; Pitmarshall – SRT-6 rims AVAILABLE – SRT-6 complete drive train package(engine, trans, differential, vin coded modules, wiring harnesses, intercooler system) Mferreira3417 – SRT-6 complete dash and center console (no electrical/electronics, or silver trim) - Shipped MJPowers - SRT calipers, rotors, and springs - In progress Wedge - Springs James1549 - Windshield trim - SOLD Velociabstract - Passenger side sail panel, quarter window trim, seat belt trim, rear sway bar links. SparkieSRT6 - Steering Wheel, possibly airbag, rubber e-brake cover.. Rmaderman - Fender to body seals.- Shipped Blacksrt6 - Both inner front fender well plastic doors, Both clear plastic tag light lenses, All rubber jacking points under the car, rubber bumpers off the valve covers that the intake filter clips to. Primeaux - Seats, Headlights, Ash Tray, Door Speaker Covers - REPLIED Post any item you are interested in, and I will keep the list updated. Even if someone else is on the list, you will be next in line if first on list passes. Also we are looking at several other SRT-6's in middle/late January. Once I get the vehicle in and verify condition, I will PM with price. You can also email me at - thecrossfireshop @ gmail . com (remove the spaces). |
Re: 2005 SSB SRT-6 Part Out thread
If the windshield trim survived, I am interested. James
|
Re: 2005 SSB SRT-6 Part Out thread
I am interested in rear wing
|
Re: 2005 SSB SRT-6 Part Out thread
And maybe the trans and rear end and TCU., front and rear sway bars.
|
Re: 2005 SSB SRT-6 Part Out thread
I need a passenger side sail panel that goes from the small window to the trunk area and the dark gray part that covers the seat belt anchor and beneath the small side window on the same side. Well, if you can get them off without breaking them.;)
Les |
Re: 2005 SSB SRT-6 Part Out thread
Interested in the springs :)
|
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by LantanaTX
I am interested in rear wing
|
Re: 2005 SSB SRT-6 Part Out thread
no i don't have a need for any of the silver trim, also took pics today of dash parts that i need, i will forward them to you email. the rear console is what i need without the cupholder and mirror adjuster switch so you can sell them. i have these parts i want from you, but the wrong color that origanily came with the car. i need the dark slate/charcoal color. the top dash pad on mine is in rough shape all from when they stole the airbag and would like to replace it. i allready replaced the airbag for 1800 from dealer
|
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by mferreira3417
no i don't have a need for any of the silver trim, also took pics today of dash parts that i need, i will forward them to you email. the rear console is what i need without the cupholder and mirror adjuster switch so you can sell them. i have these parts i want from you, but the wrong color that origanily came with the car. i need the dark slate/charcoal color. the top dash pad on mine is in rough shape all from when they stole the airbag and would like to replace it. i allready replaced the airbag for 1800 from dealer
https://www.crossfireforum.org/galle...7489311_6X.JPG https://www.crossfireforum.org/galle...7489311_5X.JPG |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by MrMoPar
Are you still interested in the differential from the Limited? Let me know.
|
Re: 2005 SSB SRT-6 Part Out thread
Interested in the steering wheel if in great condition.
Thanks. |
Re: 2005 SSB SRT-6 Part Out thread
When Ashley had the Lambo doors they cut the plastic piece in front of the door separating the inner fender and wheel well. It has one screw/bolt holding it in. It is about 4 inches wide and 18 inches high. I need both sides. Thanks Randy
|
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by RMADERMAN
When Ashley had the Lambo doors they cut the plastic piece in front of the door separating the inner fender and wheel well. It has one screw/bolt holding it in. It is about 4 inches wide and 18 inches high. I need both sides. Thanks Randy
|
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by SparkieSRT6
Interested in the steering wheel if in great condition.
Thanks. |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by MrMoPar
With or without bag?
Really depends on how much $. Would love the bag too but only if inexpensive. Thanks. |
Re: 2005 SSB SRT-6 Part Out thread
Here are the junkyard parts that I have been looking for:
1. Both inner front fender well plastic doors 2. Both clear plastic tag light lenses 3. All rubber jacking points under the car 4. All rubber bumpers off the valve covers that the intake filter clips to |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by BLACKSRT-6
Here are the junkyard parts that I have been looking for:
1. Both inner front fender well plastic doors 2. Both clear plastic tag light lenses 3. All rubber jacking points under the car 4. All rubber bumpers off the valve covers that the intake filter clips to |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by SparkieSRT6
Interested in the steering wheel if in great condition.
Thanks. Please add my interest in: The slide on/off rubber handle for the parking brake. |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by SparkieSRT6
Please add my interest in:
The slide on/off rubber handle for the parking brake. |
Re: 2005 SSB SRT-6 Part Out thread
Originally Posted by MrMoPar
Am sure I have one of those.
|
All times are GMT -4. The time now is 01:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands