CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Crossfire Coupe (https://www.crossfireforum.org/forum/crossfire-coupe/)
-   -   P0410 code check engine light (https://www.crossfireforum.org/forum/crossfire-coupe/13707-p0410-code-check-engine-light.html)

GraphiteGhost 05-30-2012 10:58 AM

Re: P0410 code check engine light
 

Originally Posted by Mrmiata (Post 675654)
Think I would check the relay control module for stuck contacts or broke spring..



;) ^x2, sounds right! ;)

R bullard 05-30-2012 09:22 PM

Re: P0410 code check engine light
 
Thank you for that GraphiteGhost but where can I find the control module? Kind of new to fix it yourself stuff

Thanks

Mrmiata 05-30-2012 09:25 PM

Re: P0410 code check engine light
 
https://www.crossfireforum.org/forum...=mystery+start

R bullard 05-30-2012 09:32 PM

Re: P0410 code check engine light
 
Thank you so very much on my way now to fix

Mrmiata 05-30-2012 09:50 PM

Re: P0410 code check engine light
 

Originally Posted by R bullard (Post 675848)
Thank you so very much on my way now to fix

Let us know what you find.. too many threads "dead end" already.. ;)

R bullard 05-30-2012 10:41 PM

Re: P0410 code check engine light
 
Thank you you all It worked. All gooooood now

turbomar 05-30-2012 11:55 PM

Re: P0410 code check engine light
 

Originally Posted by R bullard (Post 675844)
Thank you for that GraphiteGhost but where can I find the control module? Kind of new to fix it yourself stuff

Thanks

In your case, you might need a new RCM:

2004 Mercedes Benz/Chrysler Crossfire Relay Control Module | eBay

Mrmiata 05-31-2012 07:12 AM

Re: P0410 code check engine light
 

Originally Posted by R bullard (Post 675860)
Thank you you all It worked. All gooooood now

So was it the solder joints or the actual relays?

R bullard 06-01-2012 07:25 AM

Re: P0410 code check engine light
 
it was solder joints

thanks

hdskipper 07-31-2012 09:15 PM

Re: P0410 code check engine light
 
Been having thsi intermittant since spring. No affect to drivability. Comes and goes. Takes about 8 ignition cycles for the check engine light before it will go off again. then a week or two it's on again. Seems to come on to me at or shortly after starting cold. Verified the 410 code this evening borrowing a friends obd handheld. Pulled the relay module after reading all the thread, touched up the solder joints. Relay contacts looked good. We'll see what happens. Thanks to everybody who has gone before!!!!

bionicdriver 11-14-2012 10:42 PM

Re: P0410 code check engine light
 
Where is the relay module located for the secondary air injection pump

rayth 11-15-2012 08:29 PM

Re: P0410 code check engine light
 

Originally Posted by bionicdriver (Post 708371)
Where is the relay module located for the secondary air injection pump

https://www.crossfireforum.org/forum...-no-start.html

Mrmiata 11-15-2012 08:44 PM

Re: P0410 code check engine light
 
Click Video RCM in my signature..

RED DOG 11-18-2012 07:21 PM

Re: P0410 code check engine light
 
Thought I would use this existing thread rather than start a new one . . .

My CEL came on last night. Engine seems to be running fine. I've decided to buy an OBD fault code scanner but I don't know anything about them. Any suggestions on which brand and model to buy?

onehundred80 11-18-2012 08:21 PM

Re: P0410 code check engine light
 

Originally Posted by RED DOG (Post 709524)
Thought I would use this existing thread rather than start a new one . . .

My CEL came on last night. Engine seems to be running fine. I've decided to buy an OBD fault code scanner but I don't know anything about them. Any suggestions on which brand and model to buy?

This has been popular and it has many other uses, probably the cheapest. I plugged it in once and then forgot I even had it.:rolleyes:
UltraGauge EM v1.2 [UltraGauge_EM_v1.2] - $69.95 : UltraGauge, OBD II Scan Tool & Information Center

I use an Innova 3100 scanner and it works fine. The better they are, more bells and whistles, the more costly they become.

kragath 05-09-2013 02:10 PM

Re: P0410 code check engine light
 
I remember having that problem on my Crossie on last summer, but light went off after clearing fault codes with OBD reader. AND NOW IT'S ON AGAIN!

Manual said that reason for light coming on could be low quality fuel or gas tanks cap... yeah right!?... :o

Is the RCM located next to car battery and do I have to find RCM directly for 05' model or do all models use same RCM?

onehundred80 05-09-2013 06:12 PM

Re: P0410 code check engine light
 

Originally Posted by kragath (Post 738793)
I remember having that problem on my Crossie on last summer, but light went off after clearing fault codes with OBD reader. AND NOW IT'S ON AGAIN!

Manual said that reason for light coming on could be low quality fuel or gas tanks cap... yeah right!?... :o

Is the RCM located next to car battery and do I have to find RCM directly for 05' model or do all models use same RCM?


Do not panic and buy a RCM, not yet anyway, read this thread and see the possible causes of the light on condition.
You can inspect the RCM to see if the relay for the pump has burnt contacts on welded contacts.
Do you hear the air pump work? That is the first question to answer.


The RCM is in the box by the battery, it is the module with the fuses on it. The forty amp fuse is for the air pump.

See this thread as well.

pgwwheeler 10-21-2013 05:35 PM

Re: P0410 code check engine light
 
HI Did that work. Did you find out why the intermittant P0410 code? My 2004 does just what yours was doing. Thank You Phil

onehundred80 10-21-2013 06:10 PM

Re: P0410 code check engine light
 

Originally Posted by pgwwheeler (Post 763662)
HI Did that work. Did you find out why the intermittant P0410 code? My 2004 does just what yours was doing. Thank You Phil

The answer is in your other thread you started tonight.

pgwwheeler 10-21-2013 10:14 PM

Re: P0410 code check engine light
 
So it is the relay in the RCM Thank You Now I have a non working high beam I know it is the switch I found a Mercedes 1705450304 at Ecs tuning for $280 but I think I'll wait to fix that. Been a while since I had a steering wheel off a car. Do you need a special tool to remove and install the steering wheel. I remember you have to disconnect the battery and remove fuse and wait 30 minutes. To be on the safe side. Thank You Phil


All times are GMT -4. The time now is 10:35 AM.


© 2024 MH Sub I, LLC dba Internet Brands