Acellerator Woez
Acellerator Woez
'04 coupe. Getting a P0122 and have all of the instructions for removing pedal and checking out on the bench. Got the plastic cover off and there endeth the ease.
Get 10 mm socket on nut. Is hard to turn but does. And turns and turns and turns but does not come loose. Soaking with PB Blaster but looks shiny. I suspect the stud has come loose and is just spinning.
OK so how do I get to the other end ? Seems to be under the floorboards but are all sort of things in the way. Is there a trick ? Suggestions welcome.
Am getting suspicious that PO worked onnit with a crowbar.
Get 10 mm socket on nut. Is hard to turn but does. And turns and turns and turns but does not come loose. Soaking with PB Blaster but looks shiny. I suspect the stud has come loose and is just spinning.
OK so how do I get to the other end ? Seems to be under the floorboards but are all sort of things in the way. Is there a trick ? Suggestions welcome.
Am getting suspicious that PO worked onnit with a crowbar.
Re: Acellerator Woez
OK after a few hours the PB Blaster did something and lower nut is off. However "something " is holding accelerator assembly to floor, is not just pulling off. What am I missing please ? I have been told the upper nut is not there but (4. Lift pedal off the welded stud...) is just not working. Help please.
Join Date: Nov 2019
Location: Northeast Arkansas
Age: 48
Posts: 204
Likes: 0
Received 21 Likes
on
17 Posts
Re: Acellerator Woez
The following users liked this post:
Americium (01-30-2023)
Re: Acellerator Woez
Well got the pedal off with one casualty (see pic), ziptie moment ? No-one (including service manual mentioned the second connector (lower arrow) , anyone know what it is ?
ps 2nd connector seems to be a momentary contact when accelerator is floored. Kickdown switch ?
ps 2nd connector seems to be a momentary contact when accelerator is floored. Kickdown switch ?
Last edited by Padgett; 01-31-2023 at 02:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
egeorges
Troubleshooting & Technical Questions & Modifications
2
09-12-2018 04:13 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)