Crossfire Block Heater kit.
 

Canadian Crossfires came with the block heater installed, but the cable was not supplied, at least mine was not. I would think that cars delivered in the Northern States came with a heater assembly as well.

In this photo you can see the block heater assembly, consisting of, a 'Y' elbow, the heater (the brass part with the red mark on it) and the removable cap that covers the heater terminals where the heater cable plugs into.


https://www.crossfireforum.org/galle...m/DSC_0791.JPG

Here is the the heater and the heater cable, do not buy these from Chrysler as they will cost you a small fortune. Try a Mercedes dealer. They can be found on line for much less. The 'Y' elbow is not shown.
I'll add part numbers when I find them.

https://www.crossfireforum.org/galle...ock_Heater.jpg

Rudy (rcompart) listed a kit that appears to be different from this kit, it is sold for about $300 at the Mercedes dealers. It is bolted to the water pump somehow.
I have listed that kit below.
A 112 203 00 61 - Cooling-Water Preheater Housing
A 606 200 00 96 - Preheater
A 000 159 29 32 - Preheater Connecting Cable
A 006 997 75 48 - Seal Ring
A 210 501 53 82 - Hose Water Pump Heater Unit
A 202 501 69 82 - Hose Between Water Pump Heater Unit And Radiator Bottom
N 000000 002775 - Clamp Water Pump Heater Unit (qty. 2)
N 000000 001117 - Hexalobular Bolt Housing To Timing Case Cover M6X23 (qty. 2) This bolt could be a simple hex bolt of the same size I assume.

Re: Crossfire Block Heater kit.
 

So are you saying all you need to buy is the cord? If so did you get it from the Chrysler dealer or somewhere else?

-Max

Re: Crossfire Block Heater kit.
 

Re: Crossfire Block Heater kit.
 

How does this cap come off. Is it snapped or screwed on?