Crossfire Coupe A place to discuss Coupe specific topics.

Stripes on my rocker panels

  #1 (permalink)  
Old 04-11-2012, 11:05 AM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Question Stripes on my rocker panels

hey guys, need some imput here. iv seen some xfires with the stripes on the sides of there car at the bottom. i like it alot and kinda want to do it. is it a vinyl sticker or is it painted on? and should i do it or not? noone around where i live has it on theirs and i like to be different.
Thanks!
 
  #2 (permalink)  
Old 04-11-2012, 11:15 AM
mdaniels4's Avatar
Senior Member
Join Date: Dec 2008
Location: Apple Valley, MN
Posts: 1,396
Likes: 0
Received 1 Like on 1 Post
Default Re: Stripes on my rocker panels

those are called slasher stripes and can be ordered from CCICC. I made mine from vinyl lens tape, against the white they are solid yellow, and outlined them in black 1/4" pinstripe
 
  #3 (permalink)  
Old 04-11-2012, 04:22 PM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up Re: Stripes on my rocker panels

thanks man. i checked and you have to pay to join the club before you can buy stuff off there so i may just do it myself. hopefuly it wont be too hard to do
 
  #4 (permalink)  
Old 04-11-2012, 04:26 PM
Goldwing's Avatar
Senior Member
Join Date: Dec 2005
Location: Holland MI
Posts: 2,756
Received 30 Likes on 26 Posts
Default Re: Stripes on my rocker panels

Don't forget the fuzzy dice, Pep Boys seats, and fart-can exhaust to complete the customization.
 
  #5 (permalink)  
Old 04-11-2012, 04:37 PM
+fireamx's Avatar
Senior Member
Join Date: Aug 2005
Location: Akron, Ohio
Age: 73
Posts: 7,508
Likes: 0
Received 6 Likes on 6 Posts
Default Re: Stripes on my rocker panels

Here are some of the best out there.

Search - CrossfireForum.org Gallery
 
  #6 (permalink)  
Old 04-11-2012, 10:42 PM
kjwinston's Avatar
Forum Regular
Join Date: May 2011
Location: Meridian Idaho
Age: 73
Posts: 763
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Stripes on my rocker panels

Originally Posted by xfire92
thanks man. i checked and you have to pay to join the club before you can buy stuff off there so i may just do it myself. hopefuly it wont be too hard to do
Gee the Cost is no more that 4 starbucks in the morning? Not that bad...seen worst, like Costco. Much higher there just to shop.
 
  #7 (permalink)  
Old 04-13-2012, 04:14 PM
Join Date: Sep 2009
Location: Las Vegas
Posts: 256
Likes: 0
Received 1 Like on 1 Post
Default Re: Stripes on my rocker panels

Originally Posted by +fireamx
Here are some of the best out there.

Search - CrossfireForum.org Gallery
I noticed that the photos are all the same and photoshopped with color changes. Curious question, though, is why the driver's side tire actually abuts and touches the wheel well for these photos. They do look good though.
 
  #8 (permalink)  
Old 04-23-2012, 05:08 PM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Talking Re: Stripes on my rocker panels

Finally did them. i think it looks good. what you guys think?
 
Attached Images
File Type: jpg
stripes.jpg (318.9 KB, 102 views)
  #9 (permalink)  
Old 05-01-2012, 01:54 AM
Join Date: Nov 2011
Location: Ramona, California
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Stripes on my rocker panels

Originally Posted by xfire92
Finally did them. i think it looks good. what you guys think?
looks good to me! gj man. How did you keep the angle across the bend?
 
  #10 (permalink)  
Old 05-01-2012, 03:29 PM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Post Re: Stripes on my rocker panels

Originally Posted by Gpeterson119
looks good to me! gj man. How did you keep the angle across the bend?
You just have to take your time lining it up. i used a straight edge to flatten it out and make sure its smooth in the bends. it was alot easier than i was expecting. only took about 45mins to do both sides
 
  #11 (permalink)  
Old 05-02-2012, 07:52 PM
Join Date: Nov 2011
Location: Ramona, California
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Stripes on my rocker panels

Originally Posted by xfire92
You just have to take your time lining it up. i used a straight edge to flatten it out and make sure its smooth in the bends. it was alot easier than i was expecting. only took about 45mins to do both sides
What tape did you use? what was the final cost?
 
  #12 (permalink)  
Old 05-02-2012, 08:20 PM
Mike1118's Avatar
Forum Regular
Join Date: Aug 2010
Location: Athens, Oh.
Age: 77
Posts: 582
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Stripes on my rocker panels

Duck tape and electrical tape baby!!!
 
  #13 (permalink)  
Old 05-03-2012, 12:09 AM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Post Re: Stripes on my rocker panels

Originally Posted by Gpeterson119
What tape did you use? what was the final cost?
I used a 2 inch wide vinyl tape from a site a found on the internet. its bonds to the paint after about a day...*and wont eat your paint off like duct tape would*...its about $9.50 after shipping and handling...and to do the outline i used 1/4 inch black vinyl tape that you can get from auto zone. it looks and feels like something that you would get from the dealer. all said and done it ran me about $15. not bad for something so small that makes such a big impact on the look of your car. hope that helps! here is the link to the site...you'll find that they have tons of colors.

Colored Vinyl Marking Tape
 
  #14 (permalink)  
Old 05-03-2012, 12:18 AM
Join Date: Nov 2011
Location: Ramona, California
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Stripes on my rocker panels

Yeah when I read ductape, I was like.... errrr seems a bit ghetto to me but people find extra ordinary ways to do extraordinary things!
 
  #15 (permalink)  
Old 05-03-2012, 12:52 AM
xfire92's Avatar
Thread Starter
Join Date: Mar 2012
Location: Asheville, NC
Posts: 59
Likes: 0
Received 0 Likes on 0 Posts
Post Re: Stripes on my rocker panels

Originally Posted by Gpeterson119
Yeah when I read ductape, I was like.... errrr seems a bit ghetto to me but people find extra ordinary ways to do extraordinary things!
haha i know exactly what you mean. but i think silver outlined in red would look good on the black. it would be a head turner
 
  #16 (permalink)  
Old 05-03-2012, 01:42 AM
Join Date: Nov 2011
Location: Ramona, California
Posts: 181
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Stripes on my rocker panels

Originally Posted by xfire92
haha i know exactly what you mean. but i think silver outlined in red would look good on the black. it would be a head turner
For sure! maybe I will try it.... for 15$ I could always take it off eh?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Da55id
WTB - Items/Parts Wanted to Buy - Archive
16
05-10-2016 10:37 PM
rocketrage
Troubleshooting & Technical Questions & Modifications
6
10-07-2015 05:00 PM
jaesa
Interior
0
09-07-2015 01:50 PM
PHeez
WTB - Items/Parts Wanted to Buy - Archive
0
08-11-2015 01:30 PM
Mopar or No Car
Parts/Accessories for sale - Archive
2
08-11-2015 08:11 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Quick Reply: Stripes on my rocker panels



All times are GMT -4. The time now is 04:48 PM.