What have you done to your CF?
Thread Starter
Joined: Oct 2004
Posts: 20
Likes: 0
From: Lake Orion, MI
What have you done to your CF?
So, i was wondering... what have you all done to your Crossfires? i put a proud to be american sticker in the back window, a local radio station's window cling on each side of the rear side window in front of the b pillar, put a green 10 inch neon light under the glovebox (towards where the floorboard meets the firewall on the interior side...
im thinkin bout puttin 2 10's or a 12 in the back, just for kicks. And a few new neons.
I like the car though. it's great.
im thinkin bout puttin 2 10's or a 12 in the back, just for kicks. And a few new neons.
I like the car though. it's great.
Senior Member
Joined: Aug 2004
Posts: 1,740
Likes: 2
From: Long Island, NY
so far ive gotten a pair of OE clear sidemarkers from Germany, as well as an OE left-hand taillight assembly from Germay. I also swapped out the radio for a single-disc MP3 player. still waiting for more exhaust options to pop up... shes still a baby. ive seen other guys have done chips, lowered suspensions, exhaust, sound system setups, neons, etc etc.
Forum Regular
Joined: Jan 2004
Posts: 459
Likes: 1
From: New Jersey and New York
Check the tech and modifications board for tons of info..
So far:
I've done LED taillights in the back (brake, turn, reverse), and also changed the front marker light to white LED to go with my xenon lowbeams and fogs.
Black tint all around except for windshield.
Painted lower front grill silver to match the rest of the trim.
Cupholder mod
Also I wouldn't really call it a mod, but in the 9 months I've owned my xfire, twice I've pulled off all 4 wheels and waxed the entire rim inside and out. This makes the wheels stay a lot cleaner than most crossfires, especially the inside of the wheel, which otherwise gets extremely black. So it kind of gives my wheels that 3rd dimension that most crossfires lose after a few thousand miles. Even if you keep the outer rim sparkling clean it's hard to get the inner that way unless you actually pull off the wheel. This is something every new crossfire owner should do, if you care about that kind of thing. Some guys have done the no brake dust pads and have had success.
So far:
I've done LED taillights in the back (brake, turn, reverse), and also changed the front marker light to white LED to go with my xenon lowbeams and fogs.
Black tint all around except for windshield.
Painted lower front grill silver to match the rest of the trim.
Cupholder mod
Also I wouldn't really call it a mod, but in the 9 months I've owned my xfire, twice I've pulled off all 4 wheels and waxed the entire rim inside and out. This makes the wheels stay a lot cleaner than most crossfires, especially the inside of the wheel, which otherwise gets extremely black. So it kind of gives my wheels that 3rd dimension that most crossfires lose after a few thousand miles. Even if you keep the outer rim sparkling clean it's hard to get the inner that way unless you actually pull off the wheel. This is something every new crossfire owner should do, if you care about that kind of thing. Some guys have done the no brake dust pads and have had success.
Administrator
Joined: Nov 2003
Posts: 7,525
Likes: 18
From: Columbus, Ohio
-C-I-C-C-I Associate Member
upgrades
koni sport shocks
eibach springs
h&r wheel spacers (10mm front & 12mm rear)
hid head lights
04' slk black leather shift ****
invinca-shield/xpel 3m clear bra w/ all optional pieces
rotex gold dust free brake pads (front & rear)
k&n filters
cargo logic cargo liner
factory rear cargo cover
debadged
50% window tint
macneil/weathertech mats
macneil clear cover/license plate bracket
painted rear tow hook (black)
piaa blue foglamp bulbs
silvervision turn signal bulbs
european clear front side marker lenses
pulled fuse for rear wing activation
covercraft dustop custom fit car cover
