Help changing passenger power seat switch.

Reply Subscribe

Thread Tools

Oct 19, 2012 | 08:25 PM

#1 (permalink)

RandyDaMan

Thread Starter

Joined: Mar 2012

Posts: 40

Likes: 0

Help changing passenger power seat switch.

I broke the power seat switch on the passenger seat. Has anyone changed one of these out? Instructions or guidance would be appreciated. I tryed doing a search but did not come up with a good match.

Thanks!

Oct 19, 2012 | 08:29 PM

#2 (permalink)

bluecoupe

Senior Member

Joined: Oct 2008

Posts: 3,140

Likes: 83

From: Grimsby, Ontario

Re: Help changing passenger power seat switch.

There is a Torx T20 screw at the front of the panel inside. Once removed pull down and forward. Much easier if you remove the seat first. The switch can be unclipped from the inside of the panel.

Last edited by bluecoupe; Oct 19, 2012 at 08:33 PM.

Oct 19, 2012 | 10:19 PM

#3 (permalink)

RandyDaMan

Thread Starter

Joined: Mar 2012

Posts: 40

Likes: 0

Quote:

Originally Posted by bluecoupe

There is a Torx T20 screw at the front of the panel inside. Once removed pull down and forward. Much easier if you remove the seat first. The switch can be unclipped from the inside of the panel.

I will give it a try. I saw the screws, but some of them I saw no way to get to.

Thanks.

Oct 22, 2012 | 01:40 PM

#4 (permalink)

RandyDaMan

Thread Starter

Joined: Mar 2012

Posts: 40

Likes: 0

Re: Help changing passenger power seat switch.

OK, so I was able to remove the switch panel , but I cannot see how to remove the wires from the main connector under the seat. Any ideas short of cutting and splicing the wires?[IMG]http://i1297.photobucket.com/albums/ag24/Randydaman1/2012-10-22125249.jpg[/

IMG]