CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Crossfire Roadster (https://www.crossfireforum.org/forum/crossfire-roadster/)
-   -   Best plug and play Radio replacement (https://www.crossfireforum.org/forum/crossfire-roadster/74895-best-plug-play-radio-replacement.html)

Tiara 08-02-2016 05:04 PM

Best plug and play Radio replacement
 
What is your opinion on the best replacement radio with easy installation for 2005 roadster limited?Thanks,
Chuck

pizzaguy 08-02-2016 09:27 PM

Re: Best plug and play Radio replacement
 
Unless you can find an old (maybe "new old stock") Becker, there is nothing out there that would be LITERALLY "plug and play". I could be wrong, but I dont' think I am. (And I doubt you'd find one to match the dash).


But in any event, the factory heads had the usual power connections (Battery, Switched Ignition, Ground) and the input from the ICM to drive the backlighting (which I did not use) and the 8 lines to the speakers-amp. I fail to see any reason to try to wire to the speed or reverse indication - so it need not be that hard anyway. Just don't use 2 volt outputs, use 4 volt outputs OR the speaker outputs to drive the amp and I'd think you'd be fine.

technolteacher 08-05-2016 03:10 PM

Re: Best plug and play Radio replacement
 
Jensen top of the line with GPS has hi voltage line outs, $300


All times are GMT -4. The time now is 10:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands