front rotors wrong bolt pattern?
 

2005 SRT6. I ordered stoptech rotors last year and just got around to installing. I have 126.35054SR/SL for the front. These is the correct part number from catalogues I have found online but the bolt pattern is wrong. What gives?

Thanks.

Re: front rotors wrong bolt pattern?
 

Are you sure you posted the part number correctly? I googled it and got nada.

Re: front rotors wrong bolt pattern?
 

Yes that's the number off of the box and my order from rock auto.

I checked needswings here now: NeedsWings Performance Products. PowerSlot slotted brake rotors Front Set and it shows126.35054SL 126.35054SR. Same part number...

Thanks for double checking for me. I guess I'm out $ and time. Hopefully I can locate the right rotors before I REALLY need to change them...

edit.. https://www.apcautotech.com/part-det...odel=crossfire also shows this to be correct part number..

Re: front rotors wrong bolt pattern?
 

Are they the same diameter and all measurements?
Does the hub fit?
Or hub and bolt pattern off?
Do they seem like a 5x114.3 instead if a 5x112?

Re: front rotors wrong bolt pattern?
 

Yes they do seem slightly larger. Weird thing is the rears have the same part number stamped on them but last two digits are 48 and they have the correct pattern.

Hub fits.

Thanks.

Re: front rotors wrong bolt pattern?
 

Could try and talk with where you got them about a exchange?
Worth a shot.
Did you happen to take a pic of it on to see the difference?

Re: front rotors wrong bolt pattern?
 

https://cimg0.ibsrv.net/gimg/www.cro...59cfb1cf8c.jpg
The rotor is stamped 125.35054 HC MIN THK 29.4 MM 158 05/10/16 0072 29019 M12

It appears that it may be 114.3mm.

Rockauto doesn't seem to carry them anymore. I'm trying to see if centric will help.

Re: front rotors wrong bolt pattern?
 

So no vendor has been any help and I've thought about my options...

1) Reorder the same rotors and possibly get the wrong ones again. $280
2) wheel spacer/adapters $70-80
3) Drill the holes into slots (cheapest but probably a stupid idea).

Any opinions? Thanks guys.

Re: front rotors wrong bolt pattern?
 

Are you saying you can’t find rotors to fit? I replaced pads and rotors in June on My SRT Roadster. Rob at Needswings got me EBC slotted rotors and ceramic pads. I can’t tell you part numbers anymore but the rotors came boxed in pairs so you could get fronts only. I think he also sells stop tech. Give him a call. I surely would not use adaptors and definitely would not try to drill them. Brakes are a pretty important component.

Re: front rotors wrong bolt pattern?
 

You are correct #3 is a stupid idea.

Re: front rotors wrong bolt pattern?
 

You want 112 x 5 with a 12mm bolt hole.