The gasket where the Oil ffiller tube base meets the top of the valve cover is weeking oil. Has anyone had this same problem? Is there gasket available and if so how much and where available?

 

GASKET, SEAL. Oil Fill Cap, Oil Filler Cap. (05080088AA)

Mopar Part 05080088AA OIL FILL CAP GASKET

GASKET, SEAL. Oil Fill Cap, Oil Filler Cap. (05080088AA)

but no guarantee anyone actually HAS it ....

( and BTW: WELCOME TO THE FORUM !!!! )

 

The gasket I need is the one where the aluminum oil filler base meets the top of the valve cover. Is this available or repairable or do you have to buy the whole valve cover with oil filler tube attached?

 

If it is where the tube connects to the magnesium breather plate, then this is the gasket.
( same as the gasket in the oil filler cap )

If it is the magnesium breather plate leaking, there is no gasket, search the forum and you will find a DIY with pictures on how to repair that with RTV sealant.

 

Yes, the leak is coming from the gasket under the breather plate. Is this gasket available? If not how do you repair?

 

If it is the magnesium breather plate leaking, there is no gasket, search the forum and you will find a DIY with pictures on how to repair that with RTV sealant.

https://www.crossfireforum.org/forum...+cover+leaking

 

Oil Cap Gasket

 

I need the gasket that is between the breather plate and the valve cover!

 

I clearly see a gasket where the breather plat and the valve cover meet.

 

You clearly saw a leak under the oil filler tube before, make up your mind and help is available.

 

Dude, you just yelled at Rob from Needswings. Hopefully you have read the valve cover link by now and understand now what alaxfire was telling you. There's no shame in being a Newbie; all of us were.

 

Mercedes Engine Sealant RTV
and to make it much easier when doing this...
Mercedes Caulk Gun

 

lmao.....you are so kind Rob...... Panic has set in.....omg....

 

Yes, funny. From another thread, I think FUBU could use those two items as well. Hopefully Rob has made a sale to Sweden recently.

 

Ask Rob, he has a direct link to the Swedish chefs. Silverarrow and I order quite a bit. But I'll ask for the gasket at the oil filler. All other gaskets should be sent this coming week.