|
Anyone change they're dome light color?
https://www.crossfireforum.org/galle...crossfire7.jpg i have changed mine to go with the turn signals they are royal blue. check it out its a very good look. https://www.crossfireforum.org/galle...crossfire7.jpg
|
Re: Anyone change they're dome light color?
Where'd you get them?
|
Re: Anyone change they're dome light color?
i got mine from autozone in maryland.
|
Re: Anyone change they're dome light color?
I did, they were too bright for me, replaced with blue ones...same color I replaced the running lights...
|
Re: Anyone change they're dome light color?
1 Attachment(s)
I replaced mine with white led bulbs...looks like HID purple color...real nice. Bought them @ PEP Boys. I also put the same bulbs in the headlights when the parking lights are on, etc. Here's a pic of the interior. I will get one of the headlights tonight when its dark.
Has anyone replaced the one in the hatch? If so, where did you get the replacement. Thanks. |
Re: Anyone change they're dome light color?
Blue LED's.
|
Re: Anyone change they're dome light color?
can somebody tell me how to get the dome lights, i don't see any screws? also has anybody tried to change the glove box lights, if sop which bulb number where they, just the wedges?
|
Re: Anyone change they're dome light color?
The cover has several retaining clips, you have to CAREFULLY pry it off by releasing the clips with a very thin flat screwdriver or something similar.
I turn my dome light off and rely on the purple cold cathode tubes I mounted under the dash. :cool: I probably will look around for purple bulbs for the dome light itself, but I'm not in any hurry. I will be adding a cold cathode tube to the hatch area as soon as I get another ballast for the extra I bought. :rolleyes: Lastly, I'm waiting on 1" Purple EL tape to replace the stock blue in a set of illuminated sill plates I bought. So that's going to be another thread when that arrives. (tutorial and pictures). Cheers! p.s. - (Yeah, the wife LOVES purple) |
Re: Anyone change they're dome light color?
I put in soft green LED's throughout the interior and love the look at night. The glovebox and the trunk area take festoon bulbs. Be sure to measure them first (usually in millimeters) before ordering replacements; the two bulbs are different sizes, as I recall.
|
Re: Anyone change they're dome light color?
There are so many different wedge LED bulbs to choose from. Are some better then the other? I was thinking about going with the 6 led bulbs all around, or would those be too bright? Does anybody have a list of all the lights the crossfire uses and their numbers?
|
Re: Anyone change they're dome light color?
I put blue led's in mine. The front lights are 194 (2) the cargo is a 44 mm festoon. Got mine from: superlumination.com
They also have chrome turn signal bulbs and just about any other bulb you might want. |
Re: Anyone change they're dome light color?
can someone post what all size the interiors are: Dome Lights, Glove Box Lights, and Hatch Area.
|
Re: Anyone change they're dome light color?
Originally Posted by rakoom2002
can someone post what all size the interiors are: Dome Lights, Glove Box Lights, and Hatch Area.
Hatch = 44mm Feston Glovebox = I know it's a feston. I'm not sure of the size. |
Re: Anyone change they're dome light color?
Originally Posted by marauderroy
I put blue led's in mine. The front lights are 194 (2) the cargo is a 44 mm festoon. Got mine from: superlumination.com
They also have chrome turn signal bulbs and just about any other bulb you might want. |
Re: Anyone change they're dome light color?
The one i actually was looking for was the glove box but I believe it is 39mm.
|
Re: Anyone change they're dome light color?
According to the service manual and Sylvania's cross reference page.
The glove box and cargo festoon bulbs are the same model C2W in the service manual (sylvania 6418) which is a 44mm (1¾") Festoon bulb. Another item of note: In the service manual it states that the instrument cluster is illuminated with bulbs. Specifically 12/2W 1K or 12/1.5W bulbs. I have not done the cross reference for these. Here's the dump for the 2005 Crossfire from Sylvania's page ------------------------------- 2005 CHRYSLER Crossfire Low beam headlamp H7 H7ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen H7XV XtraVision Halogen Upgrade: Up to 20% Brighter H7CB Cool Blue Halogen Upgrade: White Hot; Super Cool; 100% Street Legal H7LL Long Life Halogen: Lasts two and a half times longer High beam headlamp H7 H7ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen H7XV XtraVision Halogen Upgrade: Up to 20% Brighter H7CB Cool Blue Halogen Upgrade: White Hot; Super Cool; 100% Street Legal H7LL Long Life Halogen: Lasts two and a half times longer Parking light 2825 Front turn signal 7507A 7507AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style Rear turn signal 7507A 7507AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style Tail light 7528 Stop light 7528 Fog/Driving light 9006 9006SU Silverstar ULTRA for Ultra Night Vision - The Whitest and Brightest Halogen 9006ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen 9006XV XtraVision Halogen Upgrade: Up to 20% Brighter 9006CB Cool Blue Halogen Upgrade: White Hot; Super Cool; 100% Street Legal 9006LL Long Life Halogen Upgrade: Lasts one and a half times longer Back up light 7506 7506LL Long Life Upgrade: Up to twice the life of the standard lamp Front sidemarker 2825 Rear sidemarker 2825 Glove box 6418 Trunk/Cargo area 6418 __________________________________________________ __ |
Re: Anyone change they're dome light color?
Originally Posted by MMZ_TimeLord
The glove box and cargo festoon bulbs are the same model C2W in the service manual (sylvania 6418) which is a 44mm (1¾") Festoon bulb.
|
Re: Anyone change they're dome light color?
44 is to big!!!
I know I know have some that don't fit. 36 it is! |
Re: Anyone change they're dome light color?
I ended up with a 39 mm do you think that will fit. Also, how do you get to the light in the glovebox. I took out a bunch of screw and it still won't come out.
|
Re: Anyone change they're dome light color?
Originally Posted by rakoom2002
I ended up with a 39 mm do you think that will fit. Also, how do you get to the light in the glovebox. I took out a bunch of screw and it still won't come out.
|
| All times are GMT -4. The time now is 09:26 PM. |
© 2026 MH Sub I, LLC dba Internet Brands