CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Exterior & Lighting (https://www.crossfireforum.org/forum/exterior-lighting/)
-   -   Turn signal and hazard failure (https://www.crossfireforum.org/forum/exterior-lighting/54704-turn-signal-hazard-failure.html)

stevewiz 02-23-2012 01:49 PM
Turn signal and hazard failure
 
My 05 had a total failure of turn signals and hazards. No dash indications or exterior signals. Fuses check good. All other light functions work.
I've read other posts and would appreciate any advice. Does the switch
In the steering column do everything?
With no hazards I'm looking for where the hazards and turn signals meet.
Ideas Please!

onehundred80 02-23-2012 03:42 PM
Re: Turn signal and hazard failure
 
Originally Posted by stevewiz
My 05 had a total failure of turn signals and hazards. No dash indications or exterior signals. Fuses check good. All other light functions work.
I've read other posts and would appreciate any advice. Does the switch
In the steering column do everything?
With no hazards I'm looking for where the hazards and turn signals meet.
Ideas Please!
These systems have the Illumination Control Module in common, even though the fuses are under the hood (#35) and on the ICM (#4), look up the Shop Manual to see the details.

stevewiz 02-28-2012 01:31 PM
Re: Turn signal and hazard failure
 
Thanks, I'm casing down that now.. Really appreciate the intel!


All times are GMT -4. The time now is 09:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands