I am new to the crossfire forums and recently purchased a crossfire of my own. I have a 06 black limited crossfire 64K and I LOVE IT! , I have thus far blacked out the taillights, rims, made eyelids and had it tinted yesterday, I am slowly working on the aesthetics and working my way to audio , exhaust, etc..

I would really like to get some slasher decals made but have been unsuccessful in finding any dimension specs so far.. I know you can purchase them on here but for a $35 fee to join , $25 monthly dues and $32 for the decals themselves, i am going to opt for making some.. I could be wrong on the prices but from what I read at least.

So anyone that has made some do you have dimensions? or possibly a template to share?

Many Thanks.

Included a pic of my crossfire (pre-tint)

 

You might try sending a private message to the forum member "beaner" .. he's been a great asset for these..

I can get you the width of the stripes and spacing between them later on if you really want to do your own..

Oh.. and welcome to the club..

Edit: Here's you a link to him..

https://www.crossfireforum.org/forum...rs/beaner.html

 

I presume you are talking about CICCI, there are no monthly dues. The $25 is the annual membership fee for years two and three etc after the first year fee of $35.

 

Correct
CICCI has a one time membership fee of $35 for the first year.
No monthly dues and renewal after a year is optional and only $25
The CICCI store also has many other nice Crossfire items for sale.
Membership has it's privileges.

 

Thanks for the info I will give him a shout an to the other replies I will give Joining a thought but for now just looming to add some slasher decals to the ride thanks everyone

 

I am curious to know what the dimensions are as well.

 

I have been busy and have not made these something I try to get done... It would be nice for a few people to get things in circulation.

 

You can buy the material and space them as you like! Any decal shop can sell the the material are make them for you' Most larger auto parts have a selection of colors and widths of material very easy to do!

 

I hear ya.. still got my front brake setup sitting in the floor..

 

I made my own because while I like the location I wanted a solid color. I cut eight different strips all two and a half inches wide and twelve inches long. As far as spacing I just played around with them with the backing still on until I got the slant that I liked. Once I got the slant I pressed on the top edge of the rocker to make the tape. I then cut along that mark with a razor box cutter for a clean straight edge. The first one is the easiest to apply. The second one is a little harder because if you do not mark the tape at the top edge just right the spacing will not be uniform as you apply it. It took me a couple tries on each side before I was satisfied, which is why I cut extras in the first place. I am not sure what the width of the actual Slasher stripes are but I think mine are a little wider and the spacing is less. I wrapped the stripe all the way to the back edge of the rocker panel and cut the excess off with the box cutter.

3fda3da9-bb7d-4648-beea-5ca96443cce2_zpsf5ad707d.jpg

b58d589b-60df-4760-9f7e-7b463bcf0743_zpsdace4ed7.jpg

 

Well, that worked out! Nice.