Welcome to the Crossfire Shop!
Re: Welcome to the Crossfire Shop!
I am looking for part # 5174703AA. It is the front indicator/turn signal bulb housing. I need one for both front sides. Mine has stopped working and I have searched everywhere for one with no luck. Do you have them or can you source them for me? Any help would be appreciated.
Re: Welcome to the Crossfire Shop!
Looking for the tan trunk lining as well as the adjacent black plastic piece and the black piece the seat belt comes out of. I posted pictures here: https://www.crossfireforum.org/forum...ide-xfire.html
Thanks for your help!
Thanks for your help!
Re: Welcome to the Crossfire Shop!
Hi, I think this is how to reply... The parts I need are the small plastic covers for the subwoofers. My daughter broke both when she replace her subs. My email is rayon29498@hotmail.com.
Thanks
Thanks
Re: Welcome to the Crossfire Shop!
Inspect the plugs attached to the wiring harness and see if they are required as well. If water got into the box you can be sure the plugs got wet and corroded as well. So buy a module with all the plugs that have been cut of the harness. It would be wrong to buy the module and then have to look for the plugs.
Last edited by onehundred80; 08-16-2015 at 08:39 AM.
Re: Welcome to the Crossfire Shop!
Good day,
I’m a new crossfire owner (2005 SRT6)
I would need a rear jack pad drivers side and the access doors (both left and right) for the fog lamps. The doors on the inside of the wheel wells (I thought they were brake vents, until I removed my tires to do the brakes and realized what was missing)
Thanks
I’m a new crossfire owner (2005 SRT6)
I would need a rear jack pad drivers side and the access doors (both left and right) for the fog lamps. The doors on the inside of the wheel wells (I thought they were brake vents, until I removed my tires to do the brakes and realized what was missing)
Thanks
Re: Welcome to the Crossfire Shop!
Good day,
I’m a new crossfire owner (2005 SRT6)
I would need a rear jack pad drivers side and the access doors (both left and right) for the fog lamps. The doors on the inside of the wheel wells (I thought they were brake vents, until I removed my tires to do the brakes and realized what was missing)
Thanks
I’m a new crossfire owner (2005 SRT6)
I would need a rear jack pad drivers side and the access doors (both left and right) for the fog lamps. The doors on the inside of the wheel wells (I thought they were brake vents, until I removed my tires to do the brakes and realized what was missing)
Thanks
Fog light covers, https://www.needswings.com/fog-light-access-panels. Cover seams with Gorilla tape and never lose another one.
Jack pad, https://www.needswings.com/crossfire-jack-pads
Last edited by onehundred80; 05-18-2021 at 09:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
pizzaguy
Crossfire Events and Meets
263
04-09-2015 12:30 PM
Valk
Crossfire Events and Meets
803
12-01-2013 07:01 AM
Valk
Crossfire Events and Meets
669
11-04-2012 01:19 AM
Valk
Crossfire Events and Meets
198
08-26-2012 09:25 PM
Valk
Crossfire Events and Meets
372
08-26-2011 08:45 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)