![]() |
Driver's door lock harness removal
Starting a new thread since just have one thing left to remove: inside the driver's door and next to the calble release for the lock at the rear of the door there is a wiring harness connector. All of the manuals just say "disconnect the harness" without a clue on HOW.
It seems odd as the wire bundle seems to run over and down. There is a catch but releasing does little since I do not know which way to pull. Surely someone here has disconnected this harness. (see pictures). https://cimg0.ibsrv.net/gimg/www.cro...cd1ef1c7c9.jpg From top https://cimg1.ibsrv.net/gimg/www.cro...d33cdf57a5.jpg Looking back |
OK here's the crib
1 Attachment(s)
OK you slide a finger way under the connector, lift and wiggle gently, and the whole thingie slides out.
|
Re: Driver's door lock harness removal
Did you have to remove the weather strip to remove the enter panel to get to everything?
I am attending to remove the switch and door lock to replace the tumbler. thanks |
Re: Driver's door lock harness removal
I had the door stripped down but suppose for the lock you could just wrap back the plastic and felt. Do you know about the hidden screw to remove the lock ?
|
Re: Driver's door lock harness removal
No just removed the door panel.
please tell me about the screw thanks |
Re: Driver's door lock harness removal
2 Attachment(s)
Try this ... See attachments
Much less bother. |
| All times are GMT -4. The time now is 08:25 AM. |
© 2026 MH Sub I, LLC dba Internet Brands