Needing Chrysler emblem on steering wheel
 

Need Chrysler emblem to replace broken one on my steering wheel. Can clue it back but looks bad. Ideas welcome. Joe

Re: Needing Chrysler emblem on steering wheel
 

I have extra 3d emblems stickers for the steering wheel. Send me a PM with your info I will mail it to you for free

Re: Needing Chrysler emblem on steering wheel
 

Looking for emblem that is on the steering wheel.
https://cimg6.ibsrv.net/gimg/www.cro...f484315f45.jpg

Re: Needing Chrysler emblem on steering wheel
 

Looking at the parts diagram, it looks like that's part of the complete airbag assembly. So I don't think you can find just a separate cover, or a separate emblem being sold anywhere without buying an entire airbag assembly.
Those are over $400.

You might be able to find a Crossfire in a junkyard, where the airbag has deployed (most ones in the junkyard seem to have front end damage, so that is a likely scenario).
Then if the bag is deployed, and it didn't break the emblem, the junkyard would sell the exploded cover very cheap since it's not useable once it's deployed.
Take a knife, and maybe you can just cut the cover off the wheel, then at home you can be delicate to figure out how to get the emblem off without breaking it.

Re: Needing Chrysler emblem on steering wheel
 

Saw this cover for sale on eBay, they have a Make Offer button, so you could offer less.
Maybe this is still more than you want to spend.

https://www.ebay.com/itm/664-CHRYSLE...AAAOSwEJZc9dxM

It looks like that has the air bag assembly bolted into it.
I'm not sure if that comes apart, but I would be afraid to trust my life to an airbag that may have been exposed out in a junk yard to the weather.
If you think it could be swapped from your existing one, I would trust the airbag in my own car compared to using a bag from a junk yard.

Re: Needing Chrysler emblem on steering wheel
 

Did you ever find a solution ?
My eBay feed keeps showing me the steering wheel centers.
This one shows $46.75, when I put it on a watch list, they sent me email for a 5% discount.
https://www.ebay.com/itm/101-CHRYSLE...53.m1438.l2649
Also, the one listed in my previous post Is still on eBay for $55.

Re: Needing Chrysler emblem on steering wheel
 

Haven’t found affordable solution less buying whole air bag system and that won’t work for my budget and then cutting emblem out hoping not to break the emblem. May just have to go with the old glue it back method. :-(

QUOTE=garjoe05;934833]Did you ever find a solution ?
My eBay feed keeps showing me the steering wheel centers.
This one shows $46.75, when I put it on a watch list, they sent me email for a 5% discount.
https://www.ebay.com/itm/101-CHRYSLE...53.m1438.l2649
Also, the one listed in my previous post Is still on eBay for $55.[/QUOTE]

Re: Needing Chrysler emblem on steering wheel
 

.


:) Be careful where any airbag/wheel for our car comes from. Simply reading it came from a 04-06 may not be enough (it wouldn't be enough for me). Just saying! ;)


.

Re: Needing Chrysler emblem on steering wheel
 

I found a emblem that fits on the steering wheel. I seen a guy on youtube the part number is 05023818AA its from a pt cruiser. You have to cut the back tabs off put it works.

Re: Needing Chrysler emblem on steering wheel
 

Current bid $ 6 with shipping https://www.ebay.com/itm/CHRYSLER-PL...8AAOSw9C1gVogA

Re: Needing Chrysler emblem on steering wheel
 

I'm also looking for the steering wheel emblem stickers as mine are broken. Do you still have any available? Thank you very much!

Re: Needing Chrysler emblem on steering wheel
 

Removed

Re: Needing Chrysler emblem on steering wheel
 

https://cimg6.ibsrv.net/gimg/www.cro...5047cccc1e.jpg
I got it on ebay. It is the emblem from a convertible PT Cruiser. It is what goes on the roll bar. The part number 05023818AA

Re: Needing Chrysler emblem on steering wheel
 

JoeP - if you do not find a used emblem here is a source for a new one: https://thecrossfirestore.com/Crossf...ring_Wheel.htm

Re: Needing Chrysler emblem on steering wheel
 

:) This is the one I found the least expensive. There may be others but I went through a few different sellers and all the others were a few dollars higher. "NEW" https://www.moparpartsoverstock.com/...5023818AA.html. I am finding the 'checkout' rather weird as they want the VIN. I would suggest if you want this, to call the number and order it on the phone. There seems to be a 'rejection' if the VIN is not for a pacifica. If that is true during checkout (I wasn't going through the checkout process because I don't need to order one), the checkout probably will 'halt' or maybe a page will say something like you buy at your own risk. It IS the forum posted part number so whomever you talk with on a phone order will be able to see that part is also in/on a crossfire. Good luck! :)


.


.

Re: Needing Chrysler emblem on steering wheel
 

Maybe this suggestion is to simple but why not just swap out the airbag with another that already has the emblem.

it’s not that hard to do and there are instructions contained in The paddle shifters kit as to how to remove the airbag.

or you can spend a few more weeks looking for a replacement to glue back on. My guess is that at the end of the day both directions will cost about the same. The airbag swap would be done in an hour or less


https://cimg6.ibsrv.net/gimg/www.cro...fd850e935.jpeg
https://cimg9.ibsrv.net/gimg/www.cro...c1d33c3fa.jpeg

Re: Needing Chrysler emblem on steering wheel
 

Got lucky today. I was at the part yard and spotted a PT Cruiser convertible. Had a look at the “roll bar” and sure enough they were both there


https://cimg7.ibsrv.net/gimg/www.cro...13c14cc14.jpeg

Re: Needing Chrysler emblem on steering wheel
 

Well done and thanks. Would one be available for purchase?

Re: Needing Chrysler emblem on steering wheel
 

Already sold one
keeping the second

Re: Needing Chrysler emblem on steering wheel
 

I have the new and never opened emblem displayed here, which is now not available anymore.

Mopar Emblem

i purchased this one as a spare and would be willing to sell it for the same amount I paid $65 incl. shipping.

Just send me a PM if interested!