New Member Introductions Welcome new members !! This is the place to post a new thread and introduce yourself and tell us a little about yourself and what model Crossfire you just bought or are looking to buy. Threads created for anything other than introductions are subject to be moved to the appropriate section in the forum for the topic being posted.

Retrofit fog/driving lamps to a 2006 Base?

Thread Tools
 
Old Feb 27, 2016 | 12:40 AM
  #1 (permalink)  
Father Bryan's Avatar
Thread Starter
Joined: Feb 2016
Posts: 7
Likes: 0
From: Louisville, Kentucky
Question Retrofit fog/driving lamps to a 2006 Base?

Hi, everyone--After over a year of searching, I recently bought a 2006 Base Xfire and after some interesting negotiations with the dealer, got them to replace the catalytic converters and windshield. I'm in the process of putting it together for road trips and have questions about several things. Has anyone ever put fog or driving lamps into the knockouts on the base model? What type of aftermarket floor mats have folks gravitated to? Any thoughts on a locking fuel cap (since the fuel hatch doesn't have an interior release, it seems fuel theft and vandalism are possible). Finally, I'm planning to repair/upgrade the audio system to accommodate digital and I'm not tech-savvy enough to really know where to begin. Thanks for taking the time to read this and offer suggestions. I've always loved Xfires and now look forward to sharing that with other enthusiasts! Father Bryan
 
Attached Images
File Type: jpg
My Crossfire 2.jpg (58.7 KB, 5 views)
File Type: jpg
My Crossfire 3.jpg (58.3 KB, 6 views)
File Type: jpg
My Crossfire 4.jpg (62.3 KB, 6 views)
File Type: jpg
My Crossfire Cropped.jpg (45.4 KB, 6 views)
Reply
Old Feb 27, 2016 | 07:37 AM
  #2 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Retrofit fog/driving lamps to a 2006 Base?

1. No one has found any suitable aftermarket fog lights to my knowledge. Best to scour the junk yards for a decent pair : car-part.com
2. You can get Lloyds mats from the CICCI web site.
Chrysler Logo Floor Mats
3. The fuel door does lock when you lock the car. ( I think it does on a base, not 100% sure)
4. Kenwood marine head unit matches best and has good performance. You have no subs in a base model, but you could find them also at the above URL along with mounting hardware. You do not have the Infinity amp to drive them, but an inexpensive aftermarket amp would do the trick.
http://www.crutchfield.com/p_113M312...MR-M312BT.html
 

Last edited by ala_xfire; Feb 27, 2016 at 07:40 AM.
Reply
Old Feb 27, 2016 | 08:52 AM
  #3 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Retrofit fog/driving lamps to a 2006 Base?

As stated above by ala_xfire, the fuel door should lock when you lock the car, with the fob or the key. It is not locked when you are driving, all the doors and the hatch lock automatically at a certain speed but not the fuel door.
 
Reply
Old Feb 27, 2016 | 09:22 AM
  #4 (permalink)  
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,780
Likes: 184
From: Lineville, AL
Default Re: Retrofit fog/driving lamps to a 2006 Base?

NOTE: This place 'says' they have both left & right fogs at $125 each .....
Cockrells Auto Parts

Give 'em a call
 
Reply
Old Feb 27, 2016 | 10:08 AM
  #5 (permalink)  
Father Bryan's Avatar
Thread Starter
Joined: Feb 2016
Posts: 7
Likes: 0
From: Louisville, Kentucky
Default Re: Retrofit fog/driving lamps to a 2006 Base?

Wow! Thanks for such a thorough response. I had thought a junk yard might be a good source for the lights (my old dad and I frequented them when I was little--back then we called them "junkies," before that word took on another connotation.) I lpoked into Weathertech mats but they don't make them for our cars except an expensive special order. The audio will be more involved than my present tech knowledge level--I think that between the various components you mentioned AND going digital, I'll likely need assistance/advice from a tech-savvy friend. Thanks again for taking time to help out a Crossfire neophyte!
Originally Posted by ala_xfire
1. No one has found any suitable aftermarket fog lights to my knowledge. Best to scour the junk yards for a decent pair : car-part.com
2. You can get Lloyds mats from the CICCI web site.
Chrysler Logo Floor Mats
3. The fuel door does lock when you lock the car. ( I think it does on a base, not 100% sure)
4. Kenwood marine head unit matches best and has good performance. You have no subs in a base model, but you could find them also at the above URL along with mounting hardware. You do not have the Infinity amp to drive them, but an inexpensive aftermarket amp would do the trick.
Kenwood KMR-M312BT Marine digital media receiver (does not play CDs) at Crutchfield.com
 
Reply
Old Feb 27, 2016 | 10:21 AM
  #6 (permalink)  
Father Bryan's Avatar
Thread Starter
Joined: Feb 2016
Posts: 7
Likes: 0
From: Louisville, Kentucky
Default Re: Retrofit fog/driving lamps to a 2006 Base?

Thanks--that remains a possibility; I'd want to see them before ordering (most aftermarket lamps I've seen are round and the knockouts are sort of rectangular). The good news is the place you mentioned is in my home state!
Originally Posted by ala_xfire
NOTE: This place 'says' they have both left & right fogs at $125 each .....
Cockrells Auto Parts

Give 'em a call
 
Reply
Old Feb 27, 2016 | 10:28 AM
  #7 (permalink)  
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,432
Likes: 648
From: Ontario
Default Re: Retrofit fog/driving lamps to a 2006 Base?

Originally Posted by Father Bryan
Thanks--that remains a possibility; I'd want to see them before ordering (most aftermarket lamps I've seen are round and the knockouts are sort of rectangular). The good news is the place you mentioned is in my home state!
ala_xfire would not put you on track to buy the wrong fog lights. These will be the proper lights for a Crossfire.
 
Reply
Old Feb 29, 2016 | 08:36 PM
  #8 (permalink)  
xjken's Avatar
Forum Regular
Joined: Feb 2013
Posts: 723
Likes: 1
From: Cincinnati, Ohio
Default Re: Retrofit fog/driving lamps to a 2006 Base?

Welcome aboard, what part of Kentucky do you call home.
 
Reply
Old Feb 29, 2016 | 09:48 PM
  #9 (permalink)  
Father Bryan's Avatar
Thread Starter
Joined: Feb 2016
Posts: 7
Likes: 0
From: Louisville, Kentucky
Default Re: Retrofit fog/driving lamps to a 2006 Base?

I'm in Louisville. FULL DISCLOSURE: Knowing how Kentuckians value their heritage, I don't claim native status; I'm a Yankee transplant (NY) by way of Florida. You in the Bluegrass?
Originally Posted by xjken
Welcome aboard, what part of Kentucky do you call home.
 
Reply
Old Feb 29, 2016 | 09:54 PM
  #10 (permalink)  
Padgett's Avatar
Senior Member
Joined: Oct 2013
Posts: 2,152
Likes: 37
From: Orlando
Default Re: Retrofit fog/driving lamps to a 2006 Base?

My PC makes a terrible limited slip but the traction control does a pretty good job.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mike-in-Orange
Interior
23
Jun 14, 2019 02:01 PM
Larry Hitze
All Crossfires
4
Jan 11, 2016 11:17 PM
Rets
Crossfire Roadster
3
Jan 3, 2016 12:21 PM
onehundred80
TSBs and How-To Articles
4
Dec 27, 2015 05:03 PM
spoiler
Crossfire Roadster
28
Dec 20, 2015 11:34 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 07:30 AM.