My 2005 Crossfire convertible won't start
 

Hello everyone, I am new today in the Crossfire Forum and I currently live in Central Florida. I have a 2005 Crossfire that will not start now. We had a few problems with this before and found out (on-line) that it was a problem, most likely, with the RCM (relay control module.). We worked on that re-soldering and it did work. After finishing the job, we drove it on an hour and a half trip and everything was fine and got back home with no problems. Two days later, took it out again and it died on the road. Now it will not start again. UUggggg...Is there anyone out there, particularly in Central Florida that can help me? I love my little Crossfire and I want to get it out on the road again!!! HELP!!! Thank you so much for your help!!

Re: My 2005 Crossfire convertible won't start
 

I would buy a new RCM and send the old one to DJ for rebuild. Many times it is the relays that go bad.

Re: My 2005 Crossfire convertible won't start
 

I'm with "ZE", unless you have spent years in component-level electronic repair, and you have verified the output from the Engine Control Relay, etc. - I'd say it's still the RCM.

Keep in mind it CAN be the relay itself, not the solder.

Re: My 2005 Crossfire convertible won't start
 

That's the approach I used when I had the "no start" condition. Fortunately, it raised its ugly head while sitting in my driveway. ;)

Re: My 2005 Crossfire convertible won't start
 

Firefly 76
DJ here. I refurbish RCMs. Email me at tighed1@hotmail.com for details. ;)

Re: My 2005 Crossfire convertible won't start
 

After all this time I tend to think we have more relay failures than dry solder joints.

Re: My 2005 Crossfire convertible won't start
 

I tend to agree, in fact, I think the RCMs have aged (my new persona will be "Captain Obvious") - and that the relay failure rate has gone way up.

Re: My 2005 Crossfire convertible won't start
 

Nothing lasts forever, I can attest to that.