FS: Zeintronix ZR-2 (wide band/boost gauge)and Coin Holder Door Brand New

Thread Tools

Search this Thread

Feb 8, 2013 | 10:48 AM

#1 (permalink)

dayjor

Thread Starter

Joined: Jan 2013

Posts: 296

Likes: 0

FS: Zeintronix ZR-2 (wide band/boost gauge)and Coin Holder Door Brand New

Brand new zr-2 gauge silver with blue led display. I mounted it to the coin holder face and modified accordingly. Just pull your coin holder out and put this one in its place. This is brand new, never used. Peferct for you guys going turbo. $110 Shipped Fits and looks perfect.

Zeitronix ZR-2 Multi Gauge

ZR-2 Multi Gauge Specs:

Works with Zeitronix Zt-2 and Zt-3 (click here)
Gauge only, requires separate wideband controller (Zt-2 or Zt-3)
One gauge for displaying Wideband AFR / Lambda, Boost / Vacuum, EGT, and "User2" input (air/oil/transmission temperature, fuel/oil pressure, or voltage)
4 digit readout in Blue
Stylish, machined, anodized silver bezel and slim enclosure gives the gauge an elegant appearance
User configurable outer LED and inner digital readout values via a front push button
Gauge startup setup is configurable
No PC laptop required for gauge configuration
You can cycle through displayed values at any time using a front push button
English and Metric Units
High contrast LED display
Large 0.3" (7.5mm) digits
Slim, flat back, design for flexible gauge mounting options
Peak and Hold feature

The Multi Gauge works with all versions of the Zeitronix Zt-2 Wideband AFR meter and Datalogging System. The ZR-2 plugs into the Zt-2 DATA port. For clean and easy plug and play installation, power and serial data is supplied from the Zt-2 DATA port. There are no additional +12V or ground wires. The ZR-2 cable length is 5 ft (1.5m)
Mounting Options: The ZR-2 gauge is only 6/8" (19mm) thick. The back of the gauge is completely flat with cable hidden in a cavity and can be surface mounted almost anywhere inside the car cabin using a piece of Velcro or double sided tape. The ZR-2 base allows the gauge to be mounted in a standard 2 1/16" (52mm) gauge pod. For additional mounting options the package includes 2 set screws and 2 nuts. ZR-2 gauge dimensions: Base diameter 2" 1/16 (52mm) Bezel diameter 2" 1/2 (62mm) Thickness 0.75" (19mm) Digit height 0.3" (7.5mm)

Last edited by dayjor; Feb 8, 2013 at 07:48 PM.