Parts for sale. US shipping only
Re: Parts for sale. US shipping only
Here are items I'm interested in getting. Let me know what you have and the condition, and then we can talk about the total cost and shipping.
Thanks - Roger
- The fog light filler panels on the front bumper
- Wheel center caps
- Battery wire bracket hold down with retainer nut
- Windshield cowl
- Windshield wiper caps that go over the retaining nuts
- Jack pads
- The wide head torx screws that hold the front grill in place (If not rusted)
- Center console storage bin (where cup holder goes in the Limited versions)
- The screws that hold the headlights in place top side and bottom (If not rusted)
- A door latch catch (part on door jam held in by two screws) that is not worn or corroded
- Driver side front fender liner with fog light access door
- Manual shift **** and boot
- The little round vents on both sides of the dashboard
Thanks - Roger
Re: Parts for sale. US shipping only
DO YOU HAVE THE TOP TOOL THAT CAME WITH THE CAR? that is the tool to relieve hydrolic pressure to manually raise the top.Let me know if you have one and how much you want for it
me @ morvette2@yahoo.com. Email
me @ morvette2@yahoo.com. Email
Re: Parts for sale. US shipping only
Its a coupe so no tool.
DO YOU HAVE THE TOP TOOL THAT CAME WITH THE CAR? that is the tool to relieve hydrolic pressure to manually raise the top.Let me know if you have one and how much you want for it
me @ morvette2@yahoo.com. Email
me @ morvette2@yahoo.com. Email
Re: Parts for sale. US shipping only
Sending PM
Here are items I'm interested in getting. Let me know what you have and the condition, and then we can talk about the total cost and shipping.
Thanks - Roger
- The fog light filler panels on the front bumper
- Wheel center caps
- Battery wire bracket hold down with retainer nut
- Windshield cowl
- Windshield wiper caps that go over the retaining nuts
- Jack pads
- The wide head torx screws that hold the front grill in place (If not rusted)
- Center console storage bin (where cup holder goes in the Limited versions)
- The screws that hold the headlights in place top side and bottom (If not rusted)
- A door latch catch (part on door jam held in by two screws) that is not worn or corroded
- Driver side front fender liner with fog light access door
- Manual shift **** and boot
- The little round vents on both sides of the dashboard
Thanks - Roger
Re: Parts for sale. US shipping only
I would like the large torx head screws that hold the reinforcement bars that run from the outer frame near the doors forward to the center of the car. They are put in place with blue locktight, so you need to add a little heat to the screw head to get them out. Two would be enough for my needs; there are six all in all. Three screws on each bar.
Last edited by zip439; 07-10-2019 at 02:12 PM.
Re: Parts for sale. US shipping only
Dont have any of that
Re: Parts for sale. US shipping only
I'll will also buy the plastic 3 piece windshield surround. Text sent.
Re: Parts for sale. US shipping only
Black base coupe
Re: Parts for sale. US shipping only
One of the floor mats is missing the clip to hold it in place and yes I have the central locking pump
Re: Parts for sale. US shipping only
Besides the missing clip on the floor mats what is the condition of them. Also how much for Matt’s and pump. Can you send me pictures of the floor Matt’s . 702-445-5696. Thank you
Re: Parts for sale. US shipping only
I will text you pictures tonight when I get off work and we can discuss then
Re: Parts for sale. US shipping only
Looking for the chrome I for the back of my X-Fire
pm me ohsdavid@ymail.com Zip: 33993
pm me ohsdavid@ymail.com Zip: 33993
Thread
Thread Starter
Forum
Replies
Last Post
IamNIkoSuave
Parts/Accessories for sale - Archive
1
05-29-2019 08:03 PM
tactengage
Parts/Accessories for sale - Archive
73
03-16-2013 02:47 PM
Ringmaster
Parts/Accessories for sale - Archive
0
11-27-2009 12:47 AM
BLKFIN
Parts/Accessories for sale - Archive
14
10-15-2009 12:06 PM
KrzyFast
Crossfire SRT6
13
10-23-2008 11:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)