This is a pic of someone's new rear suspension parts to go with his camber arms...... just finishing up spacers and they will ship...

Track bars(caster), camber struts, trailing links(toe) and sway bar links. (camber arms included in pic to show full set)

 

~ now that looks like some quality goods ~

 

Looks great!!!!

 

Looks fantastic Mike.

 

HEY-What happen with your Dragon Fly table cloth you used to display your parts on? I liked it,and now it's gone. Squirrel Crusher

 

that was the seat of my computer chair and it isn't big enough for all those parts.....

 

5 spoke rims should be mandatory so everyone can see the superior workmanship on these!! maybe a mirror mounted like the front pan to reflect all that purty stainless!

 

Is one end reverse threaded so that they can be adjusted in place? Looks great.

 

They look great as a set. I am still enjoying mine, thanks again Mike...

 

What is your initial thoughts on costing for a full set of all four pair?

 

BlackSRT6.... yes, the rod ends are right and left hand threads. Loosen the jam nuts and turn the rod to adjust...re-tighten the jam nuts

the adjustable arms are $235/set and the sway bar links are $175/set.... 10% discount if you order any 2 or more sets....

 

So for double that you could make me a set for the front and the rear?

 

The front is set up different.... the camber and toe are handled with the lower control arms... MB bolts or Kmac kits(best choice and $380).....and as Steve mentioned elsewhere the sway bar is mounted different in front also and dosen't use the link.....

 

I wasn't feeling the love for the bottom mount of the sway bar link and did some test fittings and found that I can use a QA1 rod end and spacers like the other arms.... so I have revision 2 and I am very happy with them.....I had the other sets ready to go out but am going to re-do them with the new design... I just need to get more rod ends to match with the other end.... this will also double the adjustment length from 3/4" to 1 1/2".... here are pics of them and my stainless ones.....

Les.... I will send you the new parts..... you will just need to screw them onto your existing top rod ends....

 

Look at all that pretty MikeR engineering. Those are going to look awesome on someones car.

 

Thanks Mike! The new revision looks real nice. Do you want the spare parts back? Just let me know.

Les

 

yes, please when you get the new ones.... I can make them into the new style easily....

 

I've never looked at my suspension arms.

What size are the QA1 rod ends you are using? I'm curious if an off the shelf Currie Johnny Joint is a direct replacement. They are greasable and rebuildable.

 

Go to QA1 and look up the specs on the XM10 rod ends.... they are .75" ***** with a .625" hole... the spacers take the hole to 12mm to match the factory bolts and 1.5" wide to match the mounts...

 

I have my fingers crossed that the sway bar end links show up today. I have a window tomorrow during which I can install them.