Drive train vibration under strain
Drive train vibration under strain
Does anyone know why my 2004 crossfire would be vibrating under strain. It doesn't vibrate after first and second gear but when I'm in first or second and I have anything above half throttle it vibrates like crazy then stops when I get to 3rd gear. The vibrations seem to be coming from the driveshaft and back but idk what it is. I read another thread saying that the flex joints might be cracked
Join Date: May 2017
Location: Southern Maryland
Age: 61
Posts: 89
Likes: 0
Received 1 Like
on
1 Post
Re: Drive train vibration under strain
Join Date: May 2017
Location: Southern Maryland
Age: 61
Posts: 89
Likes: 0
Received 1 Like
on
1 Post
Re: Drive train vibration under strain
I assume your bearing HANGER was bad visually. The bearing itself might be ok. I suspect the rubber of the hanger would degrade before the bearing in most cases.
You will find that you can buy loose bearings, a separate hanger and an assembled hanger and bearing. I just posted about replacing just the hanger which I completed but it is a royal pain. Here's the link: https://www.crossfireforum.org/forum/engine-exhaust-transmission-differential/78629-center-bearing-hanger-replacement-instructions-available.html#post910057
You will find that you can buy loose bearings, a separate hanger and an assembled hanger and bearing. I just posted about replacing just the hanger which I completed but it is a royal pain. Here's the link: https://www.crossfireforum.org/forum/engine-exhaust-transmission-differential/78629-center-bearing-hanger-replacement-instructions-available.html#post910057
Thread
Thread Starter
Forum
Replies
Last Post
srtsmally
Parts/Accessories for sale - Archive
7
01-10-2015 11:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)