CrossfireForum - The Chrysler Crossfire and SRT6 Resource

Troubleshooting & Technical Questions & Modifications Have technical or modification questions about the Crossfire? Find out the answer, or give advice in here!

Relay Command Module

Thread Tools
 
  #1 (permalink)  
Old 06-22-2019, 10:23 PM
crossfire121's Avatar
Thread Starter
Join Date: Jan 2012
Location: Portsmouth
Age: 62
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Relay Command Module
Hello ,

Is it possible to buy the individual relays for the RCM as my fuel pump relay is dead ?

I am in the UK, Thanks
 
Reply Like
  #2 (permalink)  
Old 06-22-2019, 10:31 PM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Ontario
Age: 84
Posts: 25,369
Received 543 Likes on 459 Posts
Default Re: Relay Command Module
Originally Posted by crossfire121
Hello ,

Is it possible to buy the individual relays for the RCM as my fuel pump relay is dead ?

I am in the UK, Thanks
Here is a PDF with the relay part number in it, there are other makers of the relay naturally as the relay is a standard part. CLICK
 
Reply Like
  #3 (permalink)  
Old 06-22-2019, 11:43 PM
crossfire121's Avatar
Thread Starter
Join Date: Jan 2012
Location: Portsmouth
Age: 62
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Relay Command Module
Many thanks for the part number , would you know where best to purchase these relays from within the UK ??

Thanks again
 
Reply Like
  #4 (permalink)  
Old 06-23-2019, 12:01 AM
crossfire121's Avatar
Thread Starter
Join Date: Jan 2012
Location: Portsmouth
Age: 62
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Relay Command Module
Hello , Do you know what the relay coil resistance is please for the fuel pump relay. As 2 of the relays are 36 ohms and another 2 are 70 ohms on the RCM

Thanks again
 
Reply Like
  #5 (permalink)  
Old 06-23-2019, 03:36 AM
ala_xfire's Avatar
Senior Member
Join Date: Dec 2010
Location: Lineville, AL
Age: 79
Posts: 12,783
Received 153 Likes on 141 Posts
Default Re: Relay Command Module
All 4 relays are identical. To get a true reading the relay has to be removed from the board.
The coil resistance according to the spec sheet for relay

American Zettler
AZ970E-1A-12D


is 90 ohms.

https://www.crossfireforum.org/forum...cement-rcm.pdf
 
Last edited by ala_xfire; 06-23-2019 at 03:39 AM.
Reply Like
  #6 (permalink)  
Old 06-23-2019, 09:24 AM
onehundred80's Avatar
Senior Member
Join Date: Apr 2006
Location: Ontario
Age: 84
Posts: 25,369
Received 543 Likes on 459 Posts
Default Re: Relay Command Module
Originally Posted by ala_xfire
All 4 relays are identical. To get a true reading the relay has to be removed from the board.
The coil resistance according to the spec sheet for relay

American Zettler
AZ970E-1A-12D


is 90 ohms.

https://www.crossfireforum.org/forum...cement-rcm.pdf
I see my Data Sheet in the PDF is not working and the picture in the main PDF is an obsolete one. Guess that will have to be fixed.🙄
 
Reply Like
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Relay Control Module Part Number?
mcjack301
Crossfire Coupe
6
10-01-2020 05:55 PM
OBDII and Dash Command
pjs626
Crossfire SRT6
5
04-03-2017 06:49 PM
How To: Replace the Fuel Pump Relay Module
Style
TSBs and How-To Articles
18
01-21-2015 10:38 PM
Relay Control Module (engine won't start) - Repair Offer
tighed1
Crossfire SRT6
21
11-20-2009 11:02 AM
Are the engine management module and relay module the same?
Louie K
Troubleshooting & Technical Questions & Modifications
9
08-11-2007 08:25 AM
Back to Subforum
Troubleshooting & Technical Questions & Modifications
View Next Unread
Key Fab doesn't open or close locks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



Advanced Search
Quick Reply: Relay Command Module


Reply Closed Thread Share

All times are GMT -4. The time now is 12:05 PM.