CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Troubleshooting & Technical Questions & Modifications (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/)
-   -   Key Won't Turn Please help... (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/56281-key-wont-turn-please-help.html)

soulintent May 26, 2012 03:46 AM

Key Won't Turn Please help...
 
So while i was at work today (i drive my car around to stores all day for work) My ignition froze and would not turn at all i tried to turn it for over 45 minutes to no avail. I bought some Graphite and tried to see if that would fix it but it didn't. This has happened before but never for more than i'd say 30 seconds and today it just stopped. I'm getting it towed tomorrow morning to an auto shop but Upon searching the forum i found this has been a common issue I've read the "Sticky Ignition Key Fix!!" And have a question for those who may be more experienced.
1. How hard would it be for someone who isn't very knowledgeable about cars to fix this on their own?
2. If an auto shop fixed this themselves by putting in a new ignition cylinder or whatever would this problem re appear in a few years?

I really don't want to fork out the 1k-2k this is going to cost to fix if their is a cheaper and better solution. If you guys have any help it would be really appreciated.

GraphiteGhost May 26, 2012 08:30 AM

Re: Key Won't Turn Please help...
 
:( It came back, you should not have ignored it. Sorry your having trouble. Yes you can do it some had experiences limited to adding gas and that was about all. You can do it! If you let them at the stealership or any other shop you'll have to redo it later on, and also you'll have to deal with the separate key for the other locks. Get ir roll-backed to your home and spend the time slowly doing the sticky key fix, you'll save quite a bundle and have the confidence to tackle other studff as well. Remember to follow the instructions carefully and it'll come out A-OK. Good luck! ;)

pizzaguy May 26, 2012 09:56 AM

Re: Key Won't Turn Please help...
 
If you really can't handle fixing it yourself, as GG said, DO NOT go to a dealership. Instead, print out the Sticky Key Fix Tutorial and take it to an independent shop.

My guess is that they will charge you $80 to $120 an hour, for up to two hours to fix this.

soulintent May 26, 2012 02:43 PM

Re: Key Won't Turn Please help...
 
1 Attachment(s)
Hey guys thanks a ton for your help i decided to try it myself and got it towed to my house. I got to the part where i need to drill out the locking pin but i can't see it anywhere.. Here is a picture of what i'm seeing... Attachment 43131. And thanks again guys hopefully i can avoid the $1500 price tag.

RL67037 May 26, 2012 07:15 PM

Re: Key Won't Turn Please help...
 
The locking pin should be behind the plastic trim piece around your steering column. You may have to ~gently~ pry that trim piece back to see it. You might have to loosen the bolt in that strap clamp to free it up enough to see it.

Good luck!

RL67037

onehundred80 May 26, 2012 07:50 PM

Re: Key Won't Turn Please help...
 

Originally Posted by soulintent (Post 674861)
Hey guys thanks a ton for your help i decided to try it myself and got it towed to my house. I got to the part where i need to drill out the locking pin but i can't see it anywhere.. Here is a picture of what i'm seeing... http://i44.photobucket.com/albums/f4...-25-39_406.jpg. And thanks again guys hopefully i can avoid the $1500 price tag.

Did you read the instructions that are in the sticky here, I guess not.
https://www.crossfireforum.org/forum...key-fix_v2.pdf

soulintent May 26, 2012 10:38 PM

Re: Key Won't Turn Please help...
 

Originally Posted by RL67037 (Post 674922)
The locking pin should be behind the plastic trim piece around your steering column. You may have to ~gently~ pry that trim piece back to see it. You might have to loosen the bolt in that strap clamp to free it up enough to see it.

Good luck!

RL67037

Thanks ha i must have missed it when reading the instructions it was early and i was heading to work my bad (:

soulintent May 28, 2012 02:58 PM

Re: Key Won't Turn Please help...
 
Okay So the key still won't turn it appears the locking pin is flat but i couldn't get the key to turn to position 1. I removed the whole assembly and and unplugged the power source and even pushed in the medal locking thingy that goes towards the steering wheel (The steering wheel will now turn) but again can't get the key to position 1. Advice?

EDIT: Nvm once we got the spring out we could turn the key and she's running again i thought the instructions where to turn the key first so i could take it out but oh well it worked. thanks again guys and onehundred80 i think you did the write up you saved me a fortune can't thank you guys enough!

jk_morales11 Jun 4, 2012 05:54 PM

Re: Key Won't Turn Please help...
 
My Crossfire has done the same and the key won't turn. I just read the instructions on how to get it to run again and I will deff work on it once I get home. But my questions are:

What caused this in the first place?
How long until it locks up again?

Thank you for your time and help.

bluecoupe Jun 4, 2012 06:47 PM

Re: Key Won't Turn Please help...
 

Originally Posted by jk_morales11 (Post 676686)
My Crossfire has done the same and the key won't turn. I just read the instructions on how to get it to run again and I will deff work on it once I get home. But my questions are:

What caused this in the first place?
How long until it locks up again?

Thank you for your time and help.

What caused this in the first place? Poor design

How long until it locks up again? NEVER

pizzaguy Jun 4, 2012 10:26 PM

Re: Key Won't Turn Please help...
 
Post 10 is exactly right... but if you let a dealer fix it, the "never" changes to "about 3 years".

Texas lion Jun 7, 2012 06:49 PM

Re: Key Won't Turn Please help...
 
Hey Guys !!

I posted my same problem some months ago, I tried to do it my self and I got until the picture, I dont know what else is next, I dont know why but I cant see the pictures of the sticky fix...,I printed and tried to follow each step, so I stop making the repair like 2 months ago, can someone send me pictures please ? at leologistics@hotmail.com ?? also my biggest problem is the car is at the street just in front of my mother IN LAW !! help please!!


All times are GMT -4. The time now is 01:10 PM.


© 2026 MH Sub I, LLC dba Internet Brands