sometimes won't down shift or sometimes won't upshift after slowing down. has unknown code and can't access computer

 

Why cannot you read codes ? Most FLAPS should be able to help. I can read codes on my phone.

 

Have not been able to figure that out, it has been on 3 different computers, the last one at a Chrysler dealership and cannot access codes!

 

How many miles are on the car? If you are near 70K, it might be time for a fluid change. It could be that simple. Mine was shifting "weird" when I first bought it (with about 85K on it) so I did the fluid change and haven't had a problem since then. When doing the fluid change, the shop did unearth a code for the tranny but I can't remember what that code was right now.

Good luck - RL

 

Also - it will serve you better if you ask your questions just once and let the answers flow in. Posting them multiple times will only get confusing.

https://www.crossfireforum.org/forum...tml#post838712

RL

 

Thanks! (posted twice because I realized that I did not state what I had) The car only has about 32,000 miles. Shop is doing a "routine" service today, hope that it is just low on fluid. This is my first day of posting questions, still learning how the site works.