Top Stuck Half way up
 

Need help. I was putting a little window weld in the corner with the top halfway up. Now the button light is blinking and it will not go either way.

Re: Top Stuck Half way up
 

Disconnect the negative battery cable, wait 5 minutes, reconnect and see what you have.
Where in Alabama ?

Re: Top Stuck Half way up
 

Hey... Thanks just got through doing that. It relieved pressure on the system so I could get the top up all the way. I put towels under the window to hold it up, and left it at that. The light was still on, so I hope it will work right. We'll try it after the adhesive dries. I had stopped with the top door open thinking I could wipe down the gaskets but that was a mistake. I am near Mobile

Re: Top Stuck Half way up
 

You can finish locking it in the closed position after the weld sets using :
https://www.crossfireforum.org/forum...operation.html

It should then function normally.