CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Troubleshooting & Technical Questions & Modifications (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/)
-   -   Turns over but doesn't start (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/82596-turns-over-but-doesnt-start.html)

Mike_man458 Oct 8, 2020 07:13 AM

Turns over but doesn't start
 
Hey fellas I'm new to the famous crossfire website.i have a 05 crossfire convertible limited edition an I'm having problems with it starting I was wondering if anyone has any idea why please let me know I would appreciate it

ala_xfire Oct 8, 2020 08:09 AM

Re: Turns over but doesn't start
 
#1 cause of cranking but not starting is the CPS. Have you tried that ?

tighed1 Oct 8, 2020 02:18 PM

Re: Turns over but doesn't start
 
Any fault codes? CPS will generally give codePO335.
Turn the key to the ON position and wait 30 seconds. Does the radiator fan spin up REALLY fast?


Mike_man458 Oct 9, 2020 07:01 PM

Re: Turns over but doesn't start
 

Originally Posted by ala_xfire (Post 948562)
#1 cause of cranking but not starting is the CPS. Have you tried that ?

yea I changed both crankshaft position sensor and camshaft position sensor an still nothing I looked up on YouTube that wen u put the key in an try to start it it will turn over but want start then I'll do it again an it will do it again now the third time I try to start it there's nothing like it want even turn over people are saying something about a skreem module well I took it out an waiting till I have enough money saved then I'll buy a new one it's like $730

Mike_man458 Oct 9, 2020 07:05 PM

Re: Turns over but doesn't start
 

Originally Posted by ala_xfire (Post 948562)
#1 cause of cranking but not starting is the CPS. Have you tried that ?

Yea I changed both crankshaft position sensor and camshaft position sensor an still nothing and I checked the fuel was good and spark is good an I soldier the three points in the box by the battery an still nothing I don't know ANYMORE

pizzaguy Oct 10, 2020 11:48 AM

Re: Turns over but doesn't start
 

Originally Posted by Mike_man458 (Post 948625)
yea I changed both crankshaft position sensor and camshaft position sensor an still nothing I looked up on YouTube that wen u put the key in an try to start it it will turn over but want start then I'll do it again an it will do it again now the third time I try to start it there's nothing like it want even turn over people are saying something about a skreem module well I took it out an waiting till I have enough money saved then I'll buy a new one it's like $730

No, it does not cost $730 because you cant get them anymore. What you CAN do, is yank the ECU, SKREEM and pack them with a key and send it all off. The ECU can be set up to ignore the SKREEM. SOS Diagnostics and Needswings can both do the work.

Contact each and see what they charge. Perhaps it IS $700 but I was thinking the "SKREEM Bypass" was less expensive than that. Contact the two companies, ask, don't go by what others say, even me.


All times are GMT -4. The time now is 07:12 PM.


© 2026 MH Sub I, LLC dba Internet Brands