how to program door opener?
 

hey guys! just wondering if someone can share on how to program the door opener. i just got my car a week ago, and it didnt come with a manual.

Re: how to program door opener?
 

Welcome to the forum. You will love your car and find this to be a fantastic forum.

The definitive source for manuals is here:
https://www.crossfireforum.org/forum...ollection.html

Chrysler's site for manuals - including free owner manaul down loads - can be found here:
My Chrysler: Chrysler Owners Service Manuals - Chrysler Cars, Minivans, SUVs, Convertibles, Crossovers

Homelink instructions - how you program the opener - are also here:
HomeLink Training Instructions

:p

Re: how to program door opener?
 

stuper01: Please let us know how it goes. I haven't done mine yet -- too many other little things to work on so far.

Re: how to program door opener?
 

It works very well though it doesn't have the range of the door openers that came with my door. Programming isn't to difficult as long as you follow the instructions though I did have to "teach" my door motor the new codes, a step I was hoping I wouldn't have to do (Get out a ladder, find the button, etc., etc.).
That being said, it's a snap overall & pretty downright convienient!

Re: how to program door opener?
 

This was the FIRST thing I did when I brought my car home.

Totally easy.

Pushed the outer two buttons until the light begins to flash (to clear the memory of all buttons.)
THEN - while holding your existing remote next to the overhead -
Pressed the desired button on the overhead AND the button of my existing garage remote until the light in the remote flashes and speeds up.

DONE! Worked first time! (Unlike my first marriage).

Re: how to program door opener?
 

Re: how to program door opener?
 

Dang, and my day was going so well until I read this and it drudged up old memories. Ohhh well, at least wife number 2 makes it all worth while. :D

Re: how to program door opener?
 

Count your blessings, cause I never found her.

Re: how to program door opener?
 

I'm glad you guys had an easy time of it because I tried the day I got my car way back in July of 2005. I think I finally got the damn thing to work in July of 2008. I followed the directions to a letter and could not get it to work then one day it works??
Now if I can only get my wifes car to work, basically the same system, its a Mercedes.

Re: how to program door opener?
 

Well, I traveled half way around the world to find mine. But that Is another story. :p She does have a cute single cousin :rolleyes:

Re: how to program door opener?
 

I followed the owner's manual instructions & tried using the learn button on the main unit several times & although everything flashes as it should, it will not open the garage door. There is a note in the manual about Canadian openers? Did anyone else have a similar problem? I have a lift master professional with the purple learn button.:confused: