CrossfireForum - The Chrysler Crossfire and SRT6 Resource

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   TSBs and How-To Articles (https://www.crossfireforum.org/forum/tsbs-how-articles/)
-   -   Headlights - Low Beam (https://www.crossfireforum.org/forum/tsbs-how-articles/69721-headlights-low-beam.html)

jimcross 11-08-2014 02:58 PM

Headlights - Low Beam
 
How in the world do you replace the low-beam headlights? It appears impossible!!

Mrmiata 11-08-2014 03:49 PM

Re: Headlights - Low Beam
 
LOL... it's doable.. but here's a note.. You can pull the headlight relatively easy.. pop side marker out.. you can see that lower bolt.. remove top two "obvious" bolts.. reach around and under the headlight from engine bay and you will find #4 bolt that you can work a little and get out. Take top bolt out from Facia next to headlight.. Pressing down on the bumber cover just below the headlight you can get it pulled out.. Just did this to remove silicon sealed bulb mess! There are a couple headlight vids on facebook page..

ala_xfire 11-08-2014 03:50 PM

Re: Headlights - Low Beam
 
OR .........................................
https://www.crossfireforum.org/forum...light-bulb.pdf

Mrmiata 11-08-2014 03:50 PM

Re: Headlights - Low Beam
 
Oh wait.. your new.. LOL... there is a thread here on bulb replacement..

Mrmiata 11-08-2014 03:51 PM

Re: Headlights - Low Beam
 
Here you go..


https://www.crossfireforum.org/forum...tructions.html Click on this link..

ala_xfire 11-08-2014 03:52 PM

Re: Headlights - Low Beam
 

Originally Posted by Mrmiata (Post 818274)

You lose. Beat you by one whole minute.

Mrmiata 11-08-2014 04:50 PM

Re: Headlights - Low Beam
 
Hmm.. I need to upgrade my browser ... It's showing my response as #2 post in this thread... :p


AND... I've given him the first step to remove and polish or go all out on angel eye halo rings! LOL

ala_xfire 11-08-2014 05:38 PM

Re: Headlights - Low Beam
 

Originally Posted by Mrmiata (Post 818279)
Hmm.. I need to upgrade my browser ... It's showing my response as #2 post in this thread... :p


AND... I've given him the first step to remove and polish or go all out on angel eye halo rings! LOL

OK, then you win. ( if removing the whole assembly is the best way to replace a bulb )

Shucks, let's just call this a tie.

Mrmiata 11-08-2014 06:00 PM

Re: Headlights - Low Beam
 

Originally Posted by ala_xfire (Post 818284)
OK, then you win. ( if removing the whole assembly is the best way to replace a bulb )

Shucks, let's just call this a tie.



Well okay.. but you start thinking "pop that clip out".. you'll be gladly removing the headlight.. LOL.


All times are GMT -4. The time now is 10:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands