FREE OEM exhaust muffler mod (Low tone)
I didn't have to spend a dime and just an hour and a half of my time!
I was looking for a low tone for my Crossfire, not a tinny, raspy, trumpety sound. Not into that. This is how to go from too quiet to attention getter without breaking the bank! Short video: |
Re: FREE OEM exhaust muffler mod (Low tone)
I did this back in 2008 with no real gain, so I went to the delete of the whole tank. BTW tigging the case back together took $$ in gas and rods as it is stainless steel, and I did it myself. Woody
I have not been able to find the F150 stainless steel exhaust tip installation to replace the muffler, yet. https://www.crossfireforum.org/g/picture/4840792 https://www.crossfireforum.org/g/user/19529 for all albums |
Re: FREE OEM exhaust muffler mod (Low tone)
|
Re: FREE OEM exhaust muffler mod (Low tone)
Originally Posted by waldig
(Post 895852)
I did this back in 2008 with no real gain, so I went to the delete of the whole tank. BTW tigging the case back together took $$ in gas and rods as it is stainless steel, and I did it myself. Woody
I have not been able to find the F150 stainless steel exhaust tip installation to replace the muffler, yet. https://www.crossfireforum.org/g/picture/4840792 https://www.crossfireforum.org/g/user/19529 for all albums I saw in your photo posts, looks like you have the smaller SRT6 muffler? Mine is the larger standard muffler with a huge room for the lower tone. I guess, it was still free for me because I did the welding myself. Any way, I just thought I would share my experience, might help someone. |
Re: FREE OEM exhaust muffler mod (Low tone)
looks like you have the smaller SRT6 muffler?
I was not aware of the difference, i learned something.Thanks WW |
All times are GMT -4. The time now is 07:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands