Ignition issue Knaresborough North Yorkshire
Can anyone please recommend a good Crossfire expert in my region. My car is stuck on my drive and I am struggling to find a knowledgeable specialist.
|
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by Greenictme
(Post 916719)
Can anyone please recommend a good Crossfire expert in my region. My car is stuck on my drive and I am struggling to find a knowledgeable specialist.
|
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by Greenictme
(Post 916719)
Can anyone please recommend a good Crossfire expert in my region. My car is stuck on my drive and I am struggling to find a knowledgeable specialist.
|
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by Greenictme
(Post 916719)
Can anyone please recommend a good Crossfire expert in my region. My car is stuck on my drive and I am struggling to find a knowledgeable specialist.
|
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by KDW4Him
(Post 916722)
If it has power but does not crank search "mystery no start" here for the RCM resolder.
|
Re: Ignition issue Knaresborough North Yorkshire
No worries, mate. The joints to re-solder are the relay posts; nothing delicate.
Cheers, |
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by Chooch
(Post 916726)
No worries, mate. The joints to re-solder are the relay posts; nothing delicate.
Cheers, |
Re: Ignition issue Knaresborough North Yorkshire
Originally Posted by KDW4Him
(Post 916731)
No, No, it's the upper 3 connections at the top end of the board that are the power feedthrough from the top connectors. You CAN touch up the relay posts too, it won't hurt and you already have it out of the car...
The RCM is a relay circuit board populated with relays, resisters, and fuses (15 and 40 Amp). None of the solder joints are delicate. Sorry for not being clearer and more specific. |
All times are GMT -4. The time now is 07:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands